Living Essentials ETMGY0139 User Manual

Living Essentials ETMGY0139 User Manual

Gamma fitness treadmill

Advertisement

www.Livingess.com
USER'S MANUAL
Gamma Fitness Treadmill
SKU# ETMGY0139
Thank you very much for purchasing our product.
Please read this instruction carefully before use it and keep the instruction at proper place

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ETMGY0139 and is the answer not in the manual?

Questions and answers

Summary of Contents for Living Essentials ETMGY0139

  • Page 1 USER’S MANUAL Gamma Fitness Treadmill SKU# ETMGY0139 Thank you very much for purchasing our product. Please read this instruction carefully before use it and keep the instruction at proper place...
  • Page 2 Should your product be defective, LIVING ESSENTIALS will help in issuing replacement parts. Whether you call or write, please have your model number and reference number located on the original packaging ready for our customer service team. You will be asked to tell us what product you have, along with the date of purchase and the way you believe the product is defective.
  • Page 3: Safety Notice

    1. Caution To avoid any injuries, please read this manual carefully before using. • For safety purposes do not stand on running belt when starting the machine. • Please stop using immediately at the rst sign of nausea. • Please increase speed slowly if needed. •...
  • Page 4: Technical Speci Cation

    Do not place any objects on the machine. • Keep plug away from hot locations or replaces. • Please turn o machine and unplug after using. • Please do not stand directly on the belt while starting the machine. • Do not disassemble the machine without professional supervision.
  • Page 5: Display Monitor

    6. Display Monitor SPEED DIST. TIME CAL. STEP (1) Display “TIME” window has two modes which shows the running time. ①Forward counting time is from 0:00 to 99:59 minutes. ②Countdown is count to 0 from the set time(setting range: 5:00~99:00 minutes). The machine will stop slowly when it counts to 0:00 and shows” end”, then the machine will come to the standby mode after 5 seconds.
  • Page 6 (2) Function Of The Remote Control “Start/Stop”: In standby or countdown mode: Pressing “start/stop” button to start the ma- chine. Please note that the default speed is 0.8KM/H. Choose the preset program: Pressing “start/stop” to start the machine and the speed will changes according to the preset speed.
  • Page 7 (4) How To Match A New Remote Control Power o the treadmill Press the “speed -” in the machine and ”M” button in the remote control at the same time, keep pressing for 6 seconds. Power on the treadmill within 5 seconds, the remote control will match the ma- chine automatically (5) Dashboard ”Start”...
  • Page 8 7. Fold And Unfold (1) Fold : Unscrew the knobs, lay the handle bar down clockwise. Then screw the knobs to the frame. (2) Unfold : Loosen the knob and uplift the handle bar anticlockwise to the certain angle, then tighten the knobs. 8.
  • Page 9: Belt Adjustment

    9. Belt Adjustment (1) Running belt deviates to left Start the machine with speed 1-3KM/H (Don't stand on machine). Use the Allen wrench to turn the screw clockwise until desired tted (see g1). Then let the machine run without loading for 1-2 minutes. Please adjust like this until the belt is in the middle. (2) Running belt deviates to right Start the machine at speed 1-3 KM/H (Don't stand on machine).
  • Page 10: Troubleshooting

    11. Trouble Shooting Error Meaning Problem Solution Code Err(or E00) No Safety key on Safety key is not on 1. Put safety key in the yellow area of Panel the panel or it is not panel properly put on 2. Err(or E00) still shows or there is no function, change the computer screen/display monitor.

Table of Contents