Table of Contents
Advertisement
12
TROUBLESHOOTING
PROBLEM
If the SandShark
tracks in a repetitive pattern:
™
SANDSHARK
Automatic Vacuum Pool Cleaner Installation & User' s Guide
™
CORRECTIVE ACTION
Check the pool return line water flow and redirect it as
necessary with a return line eyeball diverter (see "To
install the eyeball diverter", on page 15).
Check the SandShark' s hose to be sure that it has
not become bent or kinked. Do not coil the hose, as it
will retain the coiled shape and reduce the cleaning
coverage.
To check the hose, lay each hose section flat on the pool
deck (or another flat surface) and look down the length
of the hose. It should be perfectly flat and straight.
Replace any sections which are bent or kinked.
Check the oscillator for: damage; lost seals (there
should be 4 seals): obstructed seals (seals should slide
freely on the oscillator).
Be sure that the short, soft flexible leader hose section
is the first section in the hose assembly (next to the
cleaner).
SAVE THESE INSTRUCTIONS
Advertisement
Table of Contents
