AtmosAir Matterhorn 1000 Installation, Operation And Maintenance Manual
Ionization generators
Hide thumbs
Also See for Matterhorn 1000:
- Installation, operation, maintenance manual (12 pages) ,
- Installation, operation and maintenance manual (11 pages) ,
- Installation, operation and maintenance manual (16 pages)
Table of Contents
Advertisement
Quick Links
Installation, Operation
and Maintenance Guide
Matterhorn 1000/1002
OUR MISSION
To improve health and wellness by actively restoring indoor air
to its pure, natural state where no pollution or contaminants
exist, while reducing energy use and emissions in the process.
IMPORTANT
Save this Document
for Future Reference &
Warranty Information
AtmosAir.com
CAG-08-21-004
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for AtmosAir Matterhorn 1000
Summary of Contents for AtmosAir Matterhorn 1000
- Page 1 Installation, Operation and Maintenance Guide Matterhorn 1000/1002 OUR MISSION IMPORTANT To improve health and wellness by actively restoring indoor air Save this Document to its pure, natural state where no pollution or contaminants for Future Reference & AtmosAir.com exist, while reducing energy use and emissions in the process.
- Page 2 3,000 VAC. ■ Installation of AtmosAir equipment is not to be performed in areas with extreme conditions such as extreme heat or cold, or where water or condensing moisture can impact the system.
- Page 3 Installation, Operation & Maintenance Guide Matterhorn 1000/1002 Disclaimer: The air purification technologies provided by Clean Air Group are intended to improve indoor air quality. They are not intended as a replacement for reasonable precautions aimed at preventing the transmission of contaminants, airborne or otherwise.
-
Page 4: Table Of Contents
Installation, Operation & Maintenance Guide Matterhorn 1000/1002 Table of Contents 01 PRODUCT OVERVIEW Control Panel Diagram 02 INSTALLATION Mechanical Installation Mechanical Installation Continued Duct Cut-Out and Quick Change Plate Procedure Duct Cut-Out and Quick Change Plate Procedure Continued Electrical Installation... -
Page 5: Product Overview
The Matterhorn 1000/1002 is a 120 or 240 VAC unit equipped with one (1) specified tube. The Matterhorn 1002 is equipped with two (2) specified tubes. -
Page 6: Installation
3. Location and Orientation: Install the unit downstream access panel for servicing should be installed over the AtmosAir of filters, coils, and fans with the ionization tubes vertical equipment. Contact AtmosAir Sales for A.W.E. specifications. -
Page 7: Mechanical Installation Continued
Installation, Operation & Maintenance Guide Matterhorn 1000/1002 7. For in-plenum/AHU installation: Mounting varies with Duct Cut-Out Dimensions bracket-style. Follow mounting instructions provided with custom bracket. Typically, provide 50.8mm (2”) of 152.4mm 6” clearance from walls. Contact AtmosAir Sales for bracket options. -
Page 8: Duct Cut-Out And Quick Change Plate Procedure
Installation, Operation & Maintenance Guide Matterhorn 1000/1002 Duct Cut-Out and Quick Change Plate Procedure PLEASE READ ENTIRE PROCEDURE BEFORE STARTING: Notes: ■ Utilize the Quick-Change Plate (Q.C.P.) in thin ducts, fiberboard ducts or where relatively frequent dismounts may occur, however the Q.C.P. can be used in any duct mounting application. -
Page 9: Duct Cut-Out And Quick Change Plate Procedure Continued
■ Field-install a power plug outlet or junction box within 8 feet (2.5 m) of the unit(s). ■ Each Matterhorn 1000/1002 series unit is typically shipped with a 10-foot power cord with a C-30 connector on one end and a 3-prong NEMA 5-15 plug on the other end. The... -
Page 10: Installation Dimensions
Installation, Operation & Maintenance Guide Matterhorn 1000/1002 Matterhorn 880/882 Installation, Operation, and Maintenance Guide Page 9 Contact Us 1-888-MY-AIR11 CAG-06-21-003 AtmosAir.com 1-888-MY-AIR11 (1-888-692-4711) -
Page 11: Field Wiring Diagram
Installation, Operation & Maintenance Guide Matterhorn 1000/1002 03 FIELD WIRING DIAGRAM AIRFLOW SAMPLING TUBE INSERT 6" INTO AHU OR DUCT AFTER FAN, AIRFLOW INTO TUBE END. SILICONE IN PLACE 1/4" POLYETHYLENE TUBING LID IS REMOVABLE MATTERHORN LEAVE OPEN TO 1000-1002... -
Page 12: Operation
A tube replacements once every two years as the production bi annual tube replacement is required. Your local AtmosAir efficiency slowly declines over time due to the stress caused dealer can provide you with a service contract. -
Page 13: Troubleshooting
Installation, Operation & Maintenance Guide Matterhorn 1000/1002 06 TROUBLESHOOTING In the event that the system is not functioning, follow these 7. If physical inspection has not revealed the cause of failure, steps IN ORDER: one may carefully observe the tubes as the ionization system is turned on to determine whether arcing is 1. -
Page 14: Mechanical Installation Illustrations
07 MECHANICAL INSTALLATION ILLUSTRATIONS Above: Matterhorn 1002 Ionization Above: Matterhorn 1000 Ionization unit. Here you will see there is one Ionization unit. Here you see there are Tube installed towards the center of the device. (This should always be installed with the tube closest to the center of the unit.) The remaining unused ‘Spring... -
Page 15: Explanation Of Technology
Installation, Operation & Maintenance Guide Matterhorn 1000/1002 08 EXPLANATION OF TECHNOLOGY AtmosAir Solutions’ ™ mission is to bring and restore every indoor environment the same clean and pure quality air that is typically found at higher mountain elevations. AtmosAir’s unique and proven air purification process significantly reduces mold, controls the spread of bacteria and airborne viruses, and reduces airborne particles that evade normal filtration solutions. -
Page 16: Product Warranty
Clean Air Group or the dealer where you purchased the unit. Disclaimer: The air purification technology provided by AtmosAir is intended to improve air quality. It is not intended to replace reasonable precautions to prevent the transmission of airborne contaminants. Customer, its employees, invitees and all persons having access to the serviced premises should comply with all applicable public health laws and guidelines issued by federal, state and local governments and health authorities such as the Centers for Disease Control and Prevention (CDC).
Need help?
Do you have a question about the Matterhorn 1000 and is the answer not in the manual?
Questions and answers