Fault Messages - Miele G 5210 Operating Instructions Manual

Fault messages

Problem
The display shows a
fault number that is not
listed below.
Fault :
The drain pump may
still be running, even
with the door open.
All of the programme
selection indicator
lights are flashing.
Fault number 
appears in the time
display.
Possible cause and remedy
There may be a technical fault.
 Switch the dishwasher off with the  button.
 Switch the dishwasher back on after a few
seconds.
 Restart the desired programme.
If the indicator lights flash again, there is a technical
fault.
 Switch the dishwasher off.
 Turn off the tap.
 Call Miele.
The Waterproof system has reacted.
 Switch the dishwasher off.
 Turn off the tap.
 Call Miele.
Circulation pump fault.
 Switch the dishwasher off.
 Switch the dishwasher back on.
 Restart the desired programme.
If the fault message appears again, there is a
technical fault.
 Switch the dishwasher off.
 Turn off the tap.
 Call Miele.
Problem solving guide
81