Advertisement

Quick Links

Dichiarazione di conformità /
Il sottoscritto /
The undersigned
In qualità di legale rappresentante della ditta /
con sede in Sede /
located
Partita IVA /
VAT
Nr.: 04458670280
Dichiara che il prodotto Caricabatterie con le seguenti specifiche
Declares that the product Battery Charger with the following specifics
È stato costruito rispettando le seguenti direttive e norme:
It was built in compliance with the following directives and standards:
Direttiva 2014/35/UE nota come "Direttiva bassa tensione" (per gli aspetti di sicurezza) /
safety aspects)
Direttiva 2014/30/UE nota come "Direttiva compatibilità elettromagnetica" /
Direttiva 2011/65/CE nota come "RoHS" /
Direttiva 2009/125/CE relativa all'istituzione di un quadro per l'elaborazione di specifiche per la progettazione ecocompatibile dei prodotti connessi
all'energia
/ Directive 2009/125/CE regarding the establishment of a framework to elaborate specifics for the eco-compatible development of products
related to energy
Direttiva delegata (UE) 2015/863 della commissione del 31 marzo 2015 recante modifica dell'allegato II della direttiva 2011/65/UE /
(EU) 2015/863 to the commission of 31 March 2015 amending Annex II of Directive 2011/65 / EU
Direttiva 2012/19/UE nota come "RAEE" /
Direttiva 2001/95/CE nota "Sicurezza generale dei prodotti" /
Norma IEC 61882:2016 metodo di analisi dei rischi secondo il metodo HAZOP
method
Norma IEC 61511-1:2016 Sicurezza funzionale - - Sistemi di sicurezza strumentati per il settore dell'industria di processo - Parte 1: Quadri, definizioni,
requisiti di sistema, hardware e di programmazione dell'applicazione /
the process industry sector - Part 1: Framework, definitions, system, hardware and application programming requirements
UNI EN ISO 7010:2017 Titolo: Segni grafici - Colori e segnali di sicurezza - Segnali di sicurezza registrati /
Colors and safety signs - Registered safety signs
EN 60 60335-2-29: 2016 - Sicurezza degli apparecchi elettrici domestici e simili Parte 2: Requisiti particolari per caricabatterie /
- Safety of household and similar electrical appliances Part 2: Particular requirements for battery chargers
Ed è quindi conforme alle direttive e normative vigenti /
La presente dichiarazione di conformità è rilasciata sotto la responsabilità esclusiva del fabbricante /
conformity is issued under the sole responsibility of the manufacturer.
Luogo e data /
Place and date
Borgo Veneto, 28/10/2020
Firma /
Signature
Valentino Mattiazzo
As legal representative of the company
in: Via G. Di Vittorio 5/9 - 35046 - Borgo Veneto (PD)
Directive 2011/65/CE known as "RoHS"
Directive 2012/19/UE known as "RAEE"
Declaration of conformity
Directive 2014/35/UE known as "Low voltage directive" (for
Directive 2014/30/UE known as "Electro-Magnetic compatibility"
Directive 2001/95/CE known as "General safety of the products"
/ Standard IEC 61882:2016 risk analysis method according to the HAZOP
Standard IEC 61511-1:2016 Functional safety - Safety instrumented systems for
And therefore it complies with the directives and regulations in force.
TCE Group S.r.l.
Etichetta prodotto
Product label
UNI EN ISO 7010:2017 Title: Graphic signs -
EN 60 60335-2-29:2016
This declaration of
Delegated Directive

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the KRONOS Series and is the answer not in the manual?

Questions and answers

Summary of Contents for TCE KRONOS Series

  • Page 1 The undersigned Valentino Mattiazzo In qualità di legale rappresentante della ditta / As legal representative of the company TCE Group S.r.l. con sede in Sede / located in: Via G. Di Vittorio 5/9 - 35046 - Borgo Veneto (PD) Partita IVA / Nr.: 04458670280...
  • Page 2 TCE Group S.r.l. Installation, use and maintenance manual – Serie KRONOS...
  • Page 3 TCE Group S.r.l. Installation, use and maintenance manual – Serie KRONOS I N S T A L L A T I O N , U S E A N D M A I N T E N A N C E M A N U A L K R O N O S S e r i e s B a t t e r y C h a r g e r TCE Group S.r.l.
  • Page 4: Table Of Contents

    TCE Group S.r.l. Installation, use and maintenance manual – Serie KRONOS Summary Section 1 ............................5 DECLARATION OF CONFORMITY ......................6 PRODUCER INFORMATION ........................6 SERVICE CENTER ............................6 PRESENTATION ............................7 Graphic conventions..........................8 Pictograms ............................8 ATTACHED DOCUMENTATION ......................... 8 Section 2 ............................
  • Page 5: Declaration Of Conformity

    TCE Group S.r.l. Installation, use and maintenance manual – Serie KRONOS Section 1 Declaration of conformity Producer information Documentation information Attached documentation...
  • Page 6: Service Center

    Installation, use and maintenance manual – Serie KRONOS DECLARATION OF CONFORMITY The KRONOS Series described in this documentation is sold together with the declaration of conformity, drawn up in compliance with the laws in force on the European territory. NOTE BEFORE USING THE DEVICE IN ANY FORM, CHECK THE PRESENCE OF THE DECLARATION OF CONFORMITY.
  • Page 7: Presentation

    Certified copy of this manual is filed in the technical file of the device, kept at TCE Group S.r.l .. TCE Group S.r.l. does not recognize any documentation that has not been produced, issued or distributed by itself or by its authorized representative.
  • Page 8: Graphic Conventions

    TCE Group S.r.l. Installation, use and maintenance manual – Serie KRONOS Graphic Conventions In order to obtain a more immediate understanding of the topics, the graphic and typographic symbols and conventions described below have been adopted in the manual. Warning graphic conventions...
  • Page 9: Attached Documentation

    TCE Group S.r.l. Installation, use and maintenance manual – Serie KRONOS ATTACHED DOCUMENTATION NOTE BEFORE USING THE DEVICE, CHECK THE PRESENCE OF ALL THE ATTACHED DOCUMENTATIONS. NOTE IF IT IS GIVEN TO A THIRD PARTY, ALL THE DOCUMENTATION OF THE DEVICE MUST BE DELIVERED...
  • Page 10: Section 2

    TCE Group S.r.l. Installation, use and maintenance manual – Serie KRONOS Section 2 Warranty General safety rules Technical specifics Intended and unintended use Residual risks...
  • Page 11 TCE Group S.r.l. Installation, use and maintenance manual – Serie KRONOS WARRANTY The warranty rules, listed in full in the purchase contract, are valid only if the device is used in the conditions of intended use. With the exception of the interventions described in section MAINTENANCE and performed with the procedures indicated, any repair or modification made to the KRONOS device by the user or by unauthorized companies will invalidate the warranty.
  • Page 12: Warning

    Different nations may have different safety regulations. It is therefore specified that in all cases in which the documentation standards are in conflict or reductive with respect to the standards of the country in which the KRONOS Series is used, the standards of the country will in any case have priority over those in the documentation.
  • Page 13: Description And Intended Use

    DESCRIPTION and INTENDED USE The KRONOS series identifies a series of battery chargers produced by TCE Group S.r.l. in collaboration with POLAR S.r.l. whose main feature is the Touch display. The device allows viewing through the display. In some models a LED has been installed that allows you to understand the state of the charge based on the color.
  • Page 14: Data Sheet

    TCE Group S.r.l. Installation, use and maintenance manual – Serie KRONOS DATA SHEET Dimensions Peso Assorb. Sezione Modulo Disegno Watt L x P x H Cavo DC 225 x 125 x 155 3,67 750W 3,3A K10 - 6mmq K20 - 10mmq...
  • Page 15: Residual Risks

    • Keep this manual carefully, as it is necessary for a correct and safe use of the KRONOS Series. Periodically check the status of the label applied to the product and restore it if it is damaged. (in case contact the service center) •...
  • Page 16 TCE Group S.r.l. Installation, use and maintenance manual – Serie KRONOS Any improper use of the device can cause: • Injury or death to the user or to third party persons • Damage to the device and/or to other material or assets belonging to the company where the device is located •...
  • Page 17: Section 3

    TCE Group S.r.l. Installation, use and maintenance manual – Serie KRONOS Section 3 Installation location Handling Installation and connection...
  • Page 18: Warnings

    TCE Group S.r.l. Installation, use and maintenance manual – Serie KRONOS WARNINGS When handling and installing the product, it is necessary to provide for the use of personal protective equipment (PPE) such as: - Clothing: Complies with the essential safety requirements in force to protect against minor mechanical damage.
  • Page 19: Installation And Connection

    TCE Group S.r.l. Installation, use and maintenance manual – Serie KRONOS INSTALLATION AND CONNECTION The product has been developed, manufactured and tested to meet all specific standards (see the declaration of conformity), if installed and connected in a proper manner.
  • Page 20: Electric Connection

    It is recommended to use bi-polar connectors suitable for the charging purpose to avoid the possibility of reverse polarity on the battery. Problems If any unexpected and dangerous anomaly occurs during a start-up and use phase of the KRONOS Series, it is recommended to follow the procedure below: •...
  • Page 21: Use Procedures

    Good ventilation ensures a safe and reliable working environment for charging operations. During charging, TCE Group S.r.l. recommends keeping a distance of AT LEAST 120cm between the battery charger and the battery and keeping at a safe distance any object that could cause or be a source of sparks or flame.
  • Page 22: Charging Curves

    TCE Group S.r.l. Installation, use and maintenance manual – Serie KRONOS Charging curves The standard curve installed inside the NEOS Series battery chargers is divided into different stages. In each stage the charging current is subject to a predefined variation based on the type of battery (Lead, AGM, GEL, etc). Any special curves are agreed in advance with the technical department.
  • Page 23: Troubleshooting

    TCE Group S.r.l. Installation, use and maintenance manual – Serie KRONOS Desolfatazione Purple still Flashing Red Anomaly (check display for error code) Troubleshooting Given the complexity of the machine, it is advisable in case of problems, to contact an authorized dealer or directly TCE Group Srl.
  • Page 24: Section 4

    TCE Group S.r.l. Installation, use and maintenance manual – Serie KRONOS Section 4 Maintenance Disposal...
  • Page 25: Safety

    TCE Group S.r.l. Installation, use and maintenance manual – Serie KRONOS MAINTENANCE Safety In system maintenance operations it is necessary to provide for the use of personal protective equipment (PPE) such as: - Clothing: In compliance with the essential safety requirements in force in the workplace in which it will be used.
  • Page 26: Decommissioning

    TCE Group S.r.l. Installation, use and maintenance manual – Serie KRONOS DECOMMISSIONING Device deactivation The device is manufactured and built according to criteria of robustness, durability and flexibility that allow it to be used for many years. Once it has reached the end of its technical and operational life, it must be put out of service in conditions where it can no longer be used for the purposes for which it was designed and built at the time, making it possible to reuse the raw materials that constitute it.

Table of Contents