Connect; Connect Via Lan - GL-INET Brume User Manual

Note: Hot plug for TF card is not supported. If you want to use TF card,
please insert before powering on the router.

Connect

You can only connect to the router via Ethernet cable or USB type-C cable.
Note: This step only connects your devices to the local area network (LAN)
of the router. You cannot access the Internet currently. In order to connect
to the Internet, please finish the setup procedures below and then
follow Internet to set up an Internet connection.

Connect via LAN

Connect your device to the LAN port of the router via Ethernet cable.
Page 3 | 164