RIB JOLLY BIG ONE Manual page 24

G
B
ATTENTION
: Avoid all the manouvres of the motor really not necessary
during the regulation. Many manouvres at the same time
cause the intervention of the thermal sensor.
REGULATION OF THE LIMIT SWITCH WHICH STOPS THE DOWNWARD MOVEMENT
When there is too little
travel tighten F1
REGULATION OF THE LIMIT SWITCH WHICH STOPS THE UPWARD MOVEMENT
Ground
When there is too little
travel unscrew F2
Ground
When there is too much
travel unscrew F1
When there is too much
travel tighten F2
24
Ground
When adjustement is complete
tighten the 2 blocking screw
When adjustement is complete
tighten the 2 blocking screw
4
5
6