PowerXL AirFryer Pro Owner's Manual page 9

Using the Accessories
Using the Rotisserie Spit
1. With the Forks removed, force the Rotisserie Shaft
through the center of the food lengthwise.
NOTE: To support the food on the Rotisserie Spit better,
insert the Rotisserie Forks into the food at different angles
(see Fig. C).
2. Slide the Forks (a) onto each side of the Spit and secure
them in place by tightening the two Set Screws (b).
3. Hold the assembled Rotisserie Spit at a slight angle with
the right side higher than the left side and insert the left
side of the Spit into the Rotisserie connection inside the
appliance (see Fig. D).
4. With the left side securely in place, lower the right side of
the Spit into the Rotisserie connection on the right side of
the appliance (see Fig. E).
5. To remove cooked food, see the "Removing the Rotisserie
Spit" section.
a
Fig. C
Fig. D
Fig. E
b
9
Air Fryer Pro 12 Qt.
PowerXL