PowerXL AirFryer Pro Owner's Manual page 10

Using the Accessories
Removing the Rotisserie Spit
1. Using the Fetch Tool, hook the bottom of the left and right
sides of the shaft attached to the Rotisserie Spit (Fig. F).
2. Pull the Rotisserie Spit away from the left Rotisserie Socket
and then lift the Spit upward to remove and disconnect
the Spit from the Rotisserie Sockets.
3. Carefully pull and remove the Rotisserie Spit from the
appliance.
Skewer Assembly
1. Insert each Skewer point through the holes on the left
Skewer Rack (see Fig. G).
2. Squeeze the clip end of each Skewer as you insert the
Skewer into the opposite Skewer Rack slot to secure.
3. Release the clip to securely rest the Skewer in the slot
(see Fig. H).
4. Repeat steps 3–6 in a uniform manner around the Skewer
Rack. Make sure the Skewers are evenly spaced (see Fig. I).
5. Ensure the Skewer Racks are inside the indentations on
the Shaft. Tighten the Set Screws and ensure they are
securely in place.
6. Use caution while inserting the Shaft into the appliance.
The Skewer ends are sharp and can poke you.
NOTE: Some accessories may not be included with purchase.
10
Air Fryer Pro 12 Qt.
PowerXL
Fig. F
Fig. G
Fig. H
Fig. I