PARTS SUPPLIED:
¨ Two #8 Phillips flat head wood screws, 5/8" long to secure
dishwasher to underside of countertop (in literature package).
¨ Two Phillips head, color matched toekick screws (in literature
package).
MATERIALS YOU WILL NEED:
¨ Ferrule, compression nut and 90° Elbow (3/8"NPT external
thread on one end, opposite end sized to fit water supply)
¨ Thread seal tape
¨ UL Listed wire nuts (3)
Materials for New
Installations Only:
¨ Air gap for drain hose, if required
¨ Waste tee for house plumbing, if applicable
¨ Electrical cable or power cord, if applicable
¨ Screw type hose clamps
¨ Strain relief for electrical connection
¨ Hand shut-off valve
¨ Water line 3/8" min. copper
¨ Coupler for extending drain line, if applicable
TOOLS YOU WILL NEED:
Phillips head screwdriver
5/16" and 1/4" nutdriver
6" Adjustable wrench
Level
Carpenters square
Measuring tape
Safety glasses
Flashlight
Bucket to catch water when flushing the line
Gloves
For New Installations
Only:
Tubing cutter
Drill and appropriate bits
Hole saw set
Installation Preparation
Phillips Head
Screwdriver
Flashlight
Gloves
2 Wood Screws
90° Elbow, Ferrule
and Compression Nut
Electrical Cable
(or Power Cord, if applicable)
Waste Tee
Screw Type
Hose Clamps
Air Gap
1/4"
and 5/16"
Nutdriver
6" Adjustable
Wrench
Safety Glasses
Bucket
Hole Saw Set
2
2 Color Matched
Toekick Screws
Hand Shut-
Off Valve
Thread
Seal Tape
Strain Relief
Level
Tubing Cutter
Measuring Tape
Drill and Bits
Screw Type
Hose Clamp
Wire Nuts (3)
Hot Water line
Coupler
Carpenters
Square