Advertisement
Available languages
Available languages
capacity, determine the position of the
extractor hood centrally over the hob
(use a plumb line for help).
Mark the position for the mounting
holes ( ) on the ceiling. With special
designs, the dimensions should be tak-
en directly from the appliance.
Drill four holes (Ø 10 mm) and insert
the wall plugs.
Screw the hanger bolts into the wall
plugs until approx.. 20 mm protrude.
Now release the filter insert ( ) from
the hood body ( ). To do this, remove
the M5 screws (10 pcs.) between the
support frame and glass front.
Then carefully remove the filter insert
downwards.
Disconnect the electrical connection in
the appliance.
en
17
Advertisement
