UMAX Technologies visionbook 12Wr Tab Manual page 11

ADDING STORAGE
You can add a storage space for saving files and installing programs
by adding an M.2 SATA SSD drive. Important: The M.2 SSD must be
a SATA type, NVMe is not supported! The supported length of M.2
SATA SSD is 2280.
2. Unscrew the hatch on the back side of your laptop.
3. Insert the M.2 SATA SSD in the orientation shown on the picture.
4. Screw the security screw to hold the SSD in place.
5. Screw back the protection hatch.
New SSD drive might need to be initialized and formatted before it
can be used.
+
1. Press Windows + X to open Windows context menu.
2. Select Disk Management.
3. Pop up window will appear. Follow the steps to initialize the drive
and format it as NTFS.
| EN | 11 |