AEG FEB51400ZM User Manual page 56

56 www.aeg.com
only, it is possible to deactivate the
notification for refilling rinse aid.
However, for best drying performance,
always use rinse aid.
If standard detergent or multi-tablets
without rinse aid are used, activate the
notification to keep the rinse aid refill
indicator active.
How to deactivate the rinse
aid empty notification
Make sure the appliance is in user mode.
1. Press Start.
• The indicators
off.
• The indicator
flashes.
• The display shows the current
setting.
–
–
2. Press Start to change the setting.
3. Press on/off to confirm the setting.
6.4 AirDry
AirDry improves the drying results with
less energy consumption.
and
= rinse aid empty
notification activated.
= rinse aid empty
notification deactivated.
AirDry is automatically activated with all
programmes excluding
applicable).
To improve the drying performance refer
are
to the XtraDry option or activate AirDry.
still
How to deactivate AirDry
Make sure the appliance is in user mode.
1. Press Delay.
• The indicators
• The indicator
• The display shows the current
2. Press Delay to change the setting:
3. Press on/off to confirm the setting.
During the drying phase, the
door opens automatically
and remains ajar.
CAUTION!
Do not try to close the
appliance door within 2
minutes after automatic
opening. This can cause
damage to the appliance.
CAUTION!
If children have access to the
appliance, it is advised to
deactivate AirDry as opening
the door may pose a danger.
are off.
still flashes.
setting: = AirDry activated.
= AirDry deactivated.
(if
and