Advertisement
2. PACKAGE CONTENTS & ASSEMBLY
2.1.
Carton Content
2.1.1. Carefully unpack the carton content and view the main body of the vacuum cleaner.
2.1.2. Locate the two side clips which hold the motor head in place (fig 1).
2.1.3. Undo the clips, remove the motor head and take out the contents of the tank.
2.1.4. Check and identify each component as listed below. If anything is missing or damaged please contact your supplier immediately.
LIST OF CONTENTS.
(Item numbers correspond to the spare parts list).
Item
Description
No
A
Detergent puck up (Parts list items 5/8/61/62/63)
41
Main body (incorp Motor head & Tank)
48
Trolley handle
54
Trolley base
60
Wire basket
2.2.
Assembly
2.2.1. Fit the trolley handle to the trolley by pressing in the spring lugs and pushing the handle into the
base upright until the spring lugs automatically locate themselves in the upright’s sides holes.
2.2.2. Place the vacuum cleaner onto the trolley base with the vacuum hose
outlet pointing outward (fig 2).
2.2.3. Locate the vacuum trolley clip at the back of the main drum and push
it onto the 2nd cross bar of the trolley. Check to ensure the drum can
lift and swing freely on this bar (fig 2).
2.2.4. Take the wire basket and hook it onto the two cross bars at the rear
of the trolley (fig 3).
2.2.5. Seat the detergent tank in the larger of the basket areas.
3. DRY VACUUM CLEANING
F
WARNING! Ensure you read, understand and apply chapter 1 “Safety Instructions”. Reminder: DO NOT vacuum hazardous dust or
substances. Use of an incorrect filter will invalidate your warranty. The green pump switch will operate independently of the vacuum
p
motor. Only press this switch if using the machine as a WET vacuum cleaner (see chapter 4).
To use the machine as a “DRY” car fabric cleaner, (no liquids involved), proceed as follows:
3.1.
Ensure the machine is unplugged from the mains power supply.
3.2.
Remove the vacuum’s motor Head, and fit the correct cartridge filter (figs 4,5,6,).
3.3.
Fit the paper dust bag onto the inside of the vacuum intake pipe (see fitting instructions on side of bag).
3.4.
Reposition the head onto the drum body ensuring that the switches face forward, and clip in place.
3.5.
Connect flexible hose to the front inlet on the tank.
3.6.
Attach the appropriate end nozzle: Flat or Tapered Nozzles.
3.7.
Plug in to power supply, and PRESS THE BLACK MOTOR “ON” SWITCH ONLY. DO NOT TOUCH THE GREEN PUMP SWITCH (fig 7).
You are now ready to use the Auto Valet machine as an ordinary vacuum cleaner for vacuuming car interiors.
3.8.
When you have completed vacuuming, switch the BLACK MOTOR SWITCH “OFF”, and unplug from the mains.
3.9.
Regularly check the dust bag and remove when it is 2/3 full. Seal bag opening with the cap attached and dispose of the bag
accordingly. The bag is manufactured so that air, not dust, will filter through the paper and as such the dust bag must not be reused.
3.10.
If you wish to use the machine for a wet application and the dust bag is less than 2/3 full, carefully remove the bag, store
for future use, and wipe the tank clean.
fig 4
Item
No
61
64
65
66
67
68
fig 5
fig 6
Description
Detergent tank
Flexible Hose
Pistol System, (trigger & tube)
Clips x 6
Narrow pick up nozzle
Upholstery tool
fig 3.
fig 7
fig 1.
Item
Description
No
76
Foam Filter
77
Vertical Paper collection Bag
78
Cartridge Filter
79
Detergent & Funnel
80
Small Nozzle
fig 2.
VMA9133 - 3 - 031003
Advertisement
