Advertisement
1
Unpack your tent and lay it out with the groundsheet
floor facing. Make sure the ground is flat and free of any
sharp objects. Find the door and rotate to face desired
direction.
3
Locate the centre pole and bring inside of the tent. Push
the pole upwards to the cone (this will be the end with
the integrated loop) and erect it vertically; ensuring it' s
located at the centre points of both the floor and roof.
5
One by one, take each erected rib and insert into the
pockets located at the top of each wall seam.
pitching your tent
2
Keeping the tent fabric on top of the base, stretch the
groundsheet to form a perfect circle. Locate the elastic
rings and use the smaller pegs to fix your base to the
ground. Spread the ropes and use the sliders to shorten
each rope to approx. 1m in length.
4
Connect together each rib (these are the aluminium
curved poles broken down into three parts).
6
Secure the full length of the rib to the tent wall by using
the Velcro to tightly hold into place. This must be done
firmly particularly at bottoms.
Advertisement
