Techly ICA-LCD H34 Installation Manual

Use with products heavier than the rated weights indicated may result in instability causing possible injury.
Please closely follow the assembly instructions. Improper installation may result in damage or serious personal injury.
Safety gear and proper tools must be used. This product should only be installed by professionals.
This product is designed to be installed on solid concrete walls or masonry walls.
Make sure that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components.
Use the mounting screws provided and DO NOT OVER TIGHTEN mounting screws.
This product contains small items that could be a choking hazard if swallowed. Keep these items away from children.
This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury.
Ensure that you have received all parts according to the component checklist prior to installation. If any parts are missing or faulty, contact your place of
purchase for a replacement.
Check that the product is secure and safe to use at regular intervals (at least every three months).
8
1
9
2
O
3
I
M
C
Extended Reach Wall-Mounted Monitor Arm
ICA-LCD H34 LDA34-112
10
11
±90°
±180°
90°
tilt
0°
-90°
INSTALLATION MANUAL
32"
75x75/100x100
MAX
2
Keep the monitor arm horizontal
while making spring tension
adjustments. Prior to any arm
movement fully remove the Allen Key.
(Note: DO NOT overtighten screw.)
1
TO ADJUST LOAD
CAPACITY TURN KNOB
DECREASE INCREASE
Heavier display turns counter-
clockwise.
Lighter display turns clockwise.
Loosen the Screw for
±3° level adjustment
Fully Remove the Screw
for ±180° screen rotation
pivot
±180°
screen level/rotation
±3°/±180°
2~8kg
(4.4~17.6lbs)
RATED
N