Table of Contents
Advertisement
NOTE : When using in steam mode, if drops of water bead the soleplate,
increase the temperature by turning the thermostat knob clockwise.
DRY IRONING
Set the steam flow controller to 0.
As for the steam mode, select the temperature according to the nature of the fabric.
When the desired temperature is reached, the indicator goes off and the iron is
ready for use.
ADVICE FOR GOOD IRONING
We recommend using the lowest temperatures with fabrics that have unusual
finishes (sequins, embroidery, flush, etc.).
If the fabric is mixed (e.g. 40% cotton 60% synthetics), set the thermostat to the
temperature of the fibre requiring the lower temperature.
If you don't know the composition of the fabric, determine the suitable temperature
by testing on a hidden corner of the garment. Start with a low temperature and
increase it gradually until it reaches the ideal temperature.
Never iron areas with traces of perspiration or other marks: the heat of the plate
fixes the stains on the fabric, making them irremovable.
To avoid marking silk, woollen or synthetic garments shiny, iron them inside out.
To avoid marking velvet garments shiny, iron in one direction (following the fibre)
and do not press down on the iron.
The heavier the washing machine is loaded, the more garments come out creased.
This also happens when the spin drying revolutions are very high.
Many fabrics are easier to iron if they are not completely dry.
For example, silk should always be ironed damp.
STORAGE
- Ensure the unit is completely cool and dry.
- Empty the reservoir by turning the iron upside down and gently shaking it.
- Do not wrap the cord around the appliance, as this will cause damage.
- Always put the iron away in a vertical position.
- Keep the appliance in a cool, dry place out of reach of children.
GUARANTEE
Before being delivered, all our products are subjected to a rigorous control.
This apparatus is guaranteed 24 months starting from the date of purchase by the
consumer.
11
Advertisement
Table of Contents
