Alternate Window Jamb Applications - Frigidaire FRA103KT1 Installation Instructions Manual

19
Slide inner window sash firmly against side of the cabinet. Make sure not to peel the seal strips from the window
track and cabinet side channels. If the panel frame does not fit snugly to the inner window sash, secure the panel frame
holes for the screws.
20
Hook the safety bracket over
NOTE:
21
Stuff the window sash seal
22
Use the window locking bracket
23
To replace the front first reconnect the coupler plugs, make the exhaust control positioned through the front in
the proper location. Gently push the front into position on the cabinet. It should click into place. Then replace the
retaining screws that holds the panel in place. DO NOT push or pull the front panel louvers.
Insttall safety bracket
safety bracket

Alternate Window Jamb Applications

To install in windows having no flanges or wood stops on the top and side jambs, the channels and panel frame must
sash becomes the flange. You can purchase the angle strip locally.
Room
Installing the Unit in a Casement Window
NOTE:
The crank handle should be removed to allow the platform to be fastened to
cabinet to clear the window, remove the window entirely by drilling out the
To avoid crank handle and window clearance problems, the unit can be
installed in a stationary sash section. However, the horizontal mullion and
24 Attach support brace to platform
brace. Try the assembly in the window to determine if the platform will rest properly,
6
Installation Instructions
FIG.18
Flush
Room
window sash seal
Window
locking
bracket
3/4"x3/4"
angle
FIG.19
Room