Frigidaire FAX054P7A6 Use & Care Manual page 8

Air Conditioner Features
(continued)
TIMER: DELAY STOP / START
FEATURE
DO THIS:
PRESS
TIMER BUTTON
TO TURN UNIT OFF:
PRESS ON/
OFF BUTTON
Now that you have mastered the operating procedure, here are more features in your control that you should become familiar with.
• The "Cool " circuit has an automatic 3 minute time delayed start if the unit is turned off and on quickly. This prevents overheating of the
compressor and possible circuit breaker tripping. The fan will continue to run during this time.
• The control will maintain the set temperature within 2 degrees Fahrenheit, between 60F and 90F degrees.
• The control is capable of displaying temperature in degrees Fahrenheit or degrees Celsius. To convert from one to the other and back,
press and hold the "TEMP/TIMER" Up (
SZ000302(En)-YaoKong(1018) 8
YOU WILL SEE: TIMER SETTING
DO THIS:
ADDITIONAL THINGS YOU SHOULD KNOW
) and Down (
LIGHT On
Note: For Delay Stop, the unit must be in the On position.
Note: For Delay Start, the unit must be in the Off position.
To adjust timer setting, tap or hold the UP arrow(^) or the DOWN
arrow(V) to change delay timer at .5 hour increments, up to 10
hours, then at 1 hour increments up to 24 hours. The control
will count down the time remaining until start (8, 7.5, 7, etc.).
The Delay Start mode automatically selects cooling with
maximum Fan Speed. The temperature maintained will be the
same as previously set. To change the set temperature, press
"COOL" then Up or Down arrows until the desired temperature
is indicated on the display. After 5 seconds, the control will
automatically change the display back to the hours remaining
until the unit will start/stop. Turning the unit "ON" or "OFF" at
any time will cancel the Delay Start/Stop function.
) buttons together for 3 seconds.
8
10/25/2004, 2:33 PM