Advertisement
Quick Links
m
m
READ BEFORE INSTALLING
UNIT
OPP5K Window
Mounting
Your ah"conditioner
is desigl_ed to install in skmdard
double lluug windows
with opening
widths ol 25 to 36
inches (635 mm to 914 ram) (FIG.
l)
Lower sash must open suificiently
to allow a clear vertical
opeuing
of 14-1/2 inches
(368 rnm). Side louvers
and the
rear of the AC must have clear air space to allow
enough
airflow
through
the condensel;
for heat removal.
The rear of' the unit must be outdoors,
not inside
a
building
or garage°
When handling
unit, be careful to avoid cuts
from sharp metal edges and aluminum
fins on
front and rear coils.
Beibre installing
unit, the top rail must be
assembled
on the uuR.
_l[bp Rail Hardware
Qty.
3/8" Screw
4
Top Rai_
1
NOTE:
SAVE CARTON
and these INSTALLATION
iNSTRUCTiONS
for furore reiereJlce. The carton is the
best way to store unit during winter, or when not in use.
Some assemNy
is required.
Please read these instructions
Mounting
Hardware
3/4 *screws
k)ck frame
sash lock
TOOLS
NEEDED:
*
Drill (if pilot holes are needed)
Qty.
7
TOOL NEEDED:
*
Phillips
Screwdriver
A. Remove
the air
conditiouer
flTom tile
carton and place on a
fiat surface.
B. Remove
top rail from
tile bottom of tile
packaging
material
as
shown in Fig. A
C. Align the hole hi the
tile top of tile unit as
shown in Fig. B
D. Secure tile top rail to
rite unit with the 3/8"
Screws as shown in
Fig. C
Fig. A
Top Rail
/
NOTE:
FOR
SAFETY
REASONS,
ALL
FOUR
(4) SCREWS
MUST
BE SECURELY
FASTENED.
Advertisement
Related Manuals for Frigidaire FAX054P7A4
Summary of Contents for Frigidaire FAX054P7A4
- Page 1 READ BEFORE INSTALLING UNIT OPP5K Window Mounting Your ah"conditioner is desigl_ed to install in skmdard double lluug windows with opening widths ol 25 to 36 inches (635 mm to 914 ram) (FIG. When handling unit, be careful to avoid cuts from sharp metal edges and aluminum fins on Lower sash must open suificiently...
- Page 2 How to Install NOTE: Top Rail and Sliding Panels a_teach side are offset to provide the proper pi_.eh to the rear of (5/16"). This is necessary for proper condensed water utilization and drainage. If you are not using the Side Panels for any reason, this pitch _.othe rear must be main_.ained! Place unit on floor, a bench or a taNe, There is a Left and Right Window Filler Pane] - be sure to...
- Page 3 Place the frame lock between the fi°ame Cut _bam seal and insert in the space extensions and the window sill as shown between the upper and lower sashes (Fig. 8). Drive 3/4" (19 nmO k)cking (FIG. 13). screws through the frame k_ck and into the sit1 (FIG.