Related Manuals for i-team i-charge 9
Summary of Contents for i-team i-charge 9
- Page 1 i-charge Battery charger User manual i-team Professional b.v. Hoppenkuil 27b, 5626 DD Eindhoven, The Netherlands Telephone: +31402662400 Email: hello@i-teamglobal.com Internet: www.i-teamglobal.com...
- Page 2 Original user manual, written in the English Language Future Cleaning Technologies B.V. Hoppenkuil 27b, 5626 DD Eindhoven, The Netherlands Telephone: +31402662400 Email: hello@i-teamglobal.com Internet: www.i-teamglobal.com Model: i-charge 9 Date:26/05/2020 Product code: S.72.0344.XXX Version: v.2.0...
-
Page 3: Preface
Become familiar with the correct operation and maintenance procedures. Store the manual in a safe place. The manual is an essential part of the i-charge 9 and must be handed over to the new owner upon resale or exchange. Each i-charge 9 has a unique serial number that can be found on the bottom of the body. -
Page 4: Reading Guide
Reading guide The following symbols and terms are used throughout this manual to alert the reader to safety issues and important information: Symbol Term Explanation WARNING Indicates a hazardous situation which, if the safety instructions are not followed, can lead to injuries of the operator or bystanders, light and/or moderate damage to the product or the environment. -
Page 5: Table Of Contents
Content Preface ..................................3 Purpose of the user manual ............................ 3 Target audience ..............................3 Operators of the i-charge 9 ............................. 3 Reading guide ................................4 Introduction ..............................7 Intended use of the product ........................7 Non-intended use of the product ......................7 Modifications ............................ - Page 6 10.1 CE Certificate ............................22...
-
Page 7: Introduction
1 Introduction The i-charge® 9 is easy and safe to use. You will be surprised how fast and effective the i-charge 9 is. This manual helps you get started and explains the operation and maintenance procedure. This manual is intended for those who work with the i-charge 9 and perform daily maintenance. The manual must be read in full before the first actions. -
Page 8: Specifications
1.4 Specifications Figure 1 Product size: 265 x 214 x 110 mm Weight: 1.7 kg Battery capacity: 2 batteries/63 Hz Power supply: 100-240 V, 50/60 Hz per side Output voltage: DC 29 4 V per side Charge current: 9 A per side Standby power: Average charging time: i-power 9: 1 hour, i-power 14: 2 hours... -
Page 9: Warranty
9 and may cause a risk to the operator. The use of alternative supplies voids manufacturer's warranty. 1.6 Identification Each i-charge 9 has a unique serial number that can be found on the bottom of the body. Your i-team partner may need this number. Explanation type plate: Item number: S.72.0344.XXX... -
Page 10: Description
2 Description The compact i-charge® 9 is designed to charge 2 batteries in parallel. The i-charge 9 consists of: Figure 3 Legend The battery charge displays. The power cable. The main body. -
Page 11: Battery Charge Displays
2.1 Battery charge displays 1. Battery charge displays. When the batteries are charged, the amount of colored bars will go up from one bar that blinks, which indicates that the batteries are almost empty. To three bars that burn continuously, which indicates that the batteries are full and ready to use. -
Page 12: Safety
3 Safety Safety comes first, therefore please take time to read and understand these safety instructions. Improper use can cause harm or void the manufacturer’s warranty. 3.1 General Safety Instructions WARNING DO NOT operate the i-charge® 9 with wet or moist hands. 3.1.1 Batteries CAUTION During normal operation the 24 V batteries cause no safety hazard on their own. -
Page 13: Risks During Operation
9 during usage; • ensure that the main voltage is identical to that mentioned on the identification plate on the i-charge 9; • only use the i-charge 9 in an environment that is well ventilated and has a good heat dissipation. -
Page 14: Transport And Storage
4 Transport and storage CAUTION The storage environment should not contain corrosive gasses. There should be no magnetic fields. Vibrations should be avoided. -
Page 15: Assembly And Installation
5 Assembly and installation 5.1 Unboxing The i-charge® 9 is packed in 1 box. Figure 5 Legend 1x power cable 1x i-charge 9 battery charger 1x this user manual... -
Page 16: Assembly
5.2 Assembly Connect the power cable (Figure 6, pos 1) to the connector at the backside of the i-charge 9. Figure 6... -
Page 17: Operation
6 Operation 6.1 Before you start • check the i-charge® 9 for damage; • check the battery for damage. 6.2 Operation 1. Plug the main power cable into the wall socket (Figure 7, pos 1). 2. Align each battery with the charging dock (Figure 7, pos 2) and insert each battery, until you hear a "click". -
Page 18: After Operation
9 to reset. 6.3 Cleaning and storage 6.3.1 Cleaning It is recommended to clean the i-charge 9 with a damp cloth every once in a while. 6.3.2 Storage • store the i-charge 9 in a dry environment;... -
Page 19: Maintenance
7 Maintenance Maintenance and repairs should only been done by manufacturer authorized personnel. -
Page 20: Trouble Shooting
Power cable not correctly inserted Check if power cable is inserted correctly. ON/OFF switch off Turn on ON/OFF switch. No display Bring the i-charge® 9 to your i-team partner. Battery not Potentially faulty battery Try with other battery first, if that one working after full works, call your i-team partner. -
Page 21: Decommissioning And Disposal
It is the responsibility of the i-charge® 9 owner to dispose of the product. At the end-of-life the i-charge 9 still contains volatile materials and must be disposed of according to your local laws and regulations regarding recycling of electrical equipment. -
Page 22: Attachments
10 Attachments 10.1 CE Certificate... - Page 23 This document is part of the technical file of the i-charge® 9 and will be available upon request.