Operation Of Current Device; Air Conditioner Features; Control Panel - Frigidaire FAS296P2A1 Use & Care Manual

Operation of Current
Device
Air Conditioner
Features

Control panel

CLEAN AIR
AUTO COOL
FEATURE
FEATURE
(SOME MODELS)
Temp /Timer Temp /Timer
AUTO AUTO
Auto Auto Clean Clean
Cool Cool Air Air
Temp /Timer Temp /Timer
Heat
Fan
Energy Saver
Cool
Timer Timer
Mode Mode
ADJUSTS
SETS
TEMPERATURE
MODE
OR TIME
Remote for
HEAT models
TURNS UNIT
ON OR OFF
ADJUSTS
TEMPERATURE
OR TIME
SETS
MODE
HEAT
MODE
Battery Size: AA
WARNING: Do Not Mix Old And New Batteries. Do Not Mix Alkaline, Standard (Carbon-Zinc), Or
Rechargeable (Nickel-Cadmium) Batteries.
! WARNING
IMPORTANT SAFETY INSTRUCTIONS before operating this appliance.
The power supply cord contains a current device that senses damage to the power cord. To
test your power supply cord do the following:
1. Plug in the Air Conditioner.
2. The power supply cord will have TWO buttons on the plug head. Press the TEST button.
You will notice a click as the RESET button pops out.
3. Press the RESET button. Again you will notice a click as the button engages.
4. The power supply cord is now supplying electricity to the unit. (On some products this is
also indicated by a light on the plug head).
NOTES:
Do not use this device to turn the unit on or off.
Always make sure the RESET button is pushed in for correct operation.
The power supply cord must be replaced if it fails to reset when either the TEST button is
pushed, or it cannot be reset. A new one can be obtained from the product manufacturer.
If power supply cord is damaged, it CANNOT be repaired. It MUST be replaced by one
obtained from the product manufacturer.
ELECTRONIC CONTROL OPERATING INSTRUCTIONS
Before you begin, thoroughly familiarize yourself with the control panel and remote as
shown below and all its functions, then follow the symbol for the functions you desire.
The unit can be controlled by the control panel alone or with the remote.
SLEEP CHECK FILTER
SETS FAN
MODE RESET BUTTON
SPEEDS
Check Check
Sleep Sleep
Filter Filter
Remote
Sensing
On/Off On/Off
TURNS UNIT
ACTIVATES
ON OR OFF
TIMER
LIGHT
SETS
FAN
SPEEDS
ACTIVATES
TIMER
Heat
To reduce the risk of fire, electric shock, or injury to persons, read the
Remote with digital display &
remote sensing feature
TURNS UNIT
ON OR OFF
ADJUSTS
TEMPERATURE
OR TIME
REMOTE TEMP.
SENSING
INDICATOR
(SOME MODELS)
SETS
MODE
ACTIVATES
REMOTE
THERMOSTAT
(some models)
Standard
remote
TURNS UNIT
ON OR OFF
ADJUSTS
TEMPERATURE
OR TIME
SETS
MODE
5
LIGHT
SETS
FAN
SPEEDS
ACTIVATES
TIMER
LIGHT
SETS
FAN
SPEEDS
ACTIVATES
TIMER