Advertisement
After connecting inlet hose to water faucets, turn on the water faucets to
flush out foreign substances (dirt, sand, or sawdust) in the water lines. Let
water drain into a bucket, and check the water condition.
For your safety and for extended product life, use only authorized components. The manufacturer is not responsible
for product malfunction or accidents caused by the use of separately purchased unauthorized parts.
Use new hoses when you install the washing machine. Do not reuse old hoses. Use only the inlet hoses provided with
the washer . LG does not recommend the use of aftermarket hoses.
Periodically check the hoses for cracks, leaks and wear, and replace the hoses every 5 years.
Do not stretch the water hoses intentionally, and make sure that they are not crushed by other objects.
Connecting Water Supply Hose to Washer
Check to see if there is a rubber seal inside the connector.
Connect the water supply hose to inlet valve of the washing machine,
and then lock it by turning the hose connecting part.
Drain Hose
Connecting the Drain Hose to Washer
1
Insert the drain hose to the connect-
ing area at the body.
The hose is placed
over a doorsill.
The hose is clogged by
alien substances.
Make sure that the
hose is not crushed.
If Extension hose is used
should be less than 3m
2
1.
Press the hose clip.
2.
While pressing, push the hose towards
the body.
3.
Release the hose clip after pushing the
hose.
Make sure that the hose is
not crushed between the
wall and the washer
Avoid submerging
the end of hose.
Less than 10cm
Advertisement
