Foil Maintenance - TAAROA JOY ALU 90 User Manual

Applies to the hydrofoils in the windfoil and kitefoil
Table of Contents

Advertisement

— 07

Foil maintenance.

— 01
Always wash the foil after each use and remember the following:
— a
Remove the front wing of the fuselage and the mast from the fuselage.
— b
Clean and rinse all the parts of the foil with clean (fresh) water before storing.
— c
Protect the parts by storing them in their TAAROA carrying case or any other suitable protection.
Be sure to keep the foil's surface clean and smooth. The foil's functionality depends on a dynamic
balance between each part—the mast and the wings are sensitive to imperfections. If the surface
finish or other parts are damaged, the risk of injury or sudden falls increases.
— d
In the event that the foil's surface is roughed after a fall, fill it with resin or epoxy putty and sand until
you're able to find a professional who can repair it. For other advice about repairs, don't hesitate to
contact our customer service (see Section 10).
Mast
EN
Fuselage
Front wing
Rear stabilizer
Screws
12

Advertisement

Table of Contents
loading

This manual is also suitable for:

Joy carbon 90Sword 108 uhmNoe 80Noe 97 freerideNoe 97 freeraceNoe 97 uhm

Table of Contents