Passing on as well as copying of this document, the use and distribution of its content are prohibited if not explic- itly permitted. Contraventions are liable to compensa- tion. Subject to technical modifications and error. SSG 12 | Version 2.02...
Introduction 1.3 Limitation of liability All information and notes in these operating instructions With the purchase of the device of METALLKRAFT you were summarised taking the applicable standards and have made a good choice. rules, the state-of-the-art and our long-term knowledge and experiences into consideration.
The version independently recognize and avoid possible dangers. SSG 12 can handle a maximum sheet thickness of 1.2 Qualified personnel: Due to their professional training, knowledge and expe-ri-...
Packaging materials made of cardboard must be shred- - Compression jaw SET für SSG 12 ded and disposed of as part of waste paper recycling. Item number: 3776104 The foils are made of polyethylene (PE), padding is - Stretching jaw SET für SSG 12...
As a result of wear and tear, it may happen that main- tenance work must be carried out on the machine. ACHTUNG! Repairs or maintenance may only be carried out by qualified and trained specialist personnel. SSG 12 | Version 2.02...
- if necessary, disassemble the machine into assem- The lever for theCompressing and stretching machine blies and components that are easy to handle and suit- SSG 12 must be ordered. The lever has the number 13 able for recycling. in the spare parts drawing 1.
The following drawing are intended to identify the required spare parts in the event of service. If applicable, submit a copy of the parts drawing including the highlighted components to your authorized retailer.. Fig. 2: Spare parts drawing SSG 12 SSG 12 | Version 2.02...
Need help?
Do you have a question about the SSG 12 and is the answer not in the manual?
Questions and answers