Larson Electronics HAL-RSLED-240W Quick Start Manual

Larson Electronics LLC
9419 E US HWY 175, Kemp, TX 75143 - P: (800) 369-6671 - F: (903) 498-3364
Warning:
To avoid the risk of fire, explosion, or electric shock, this product should be installed, inspected, and
maintained by a qualified electrician only, in accordance with all applicable electrical codes.
To avoid electric shock:

Be certain electrical power is OFF before and during installation and maintenance.

Luminaire must be connected to a wiring system with an equipment-grounding conductor.
Potential Electrostatic Charging Hazard
Avoid electrostatic discharge:

Clean lens with damp cloth only
INSTALLATION
1. Inspect shipping package and contents to ensure no damage has occurred during shipping.
2. Remove Surface/Wall Bracket from the box.
3. Mount Wall Bracket to desired location with two (2) 3/8" bolts to secure the fixture to ceiling
surface. Ensure placement of bolts in X pattern as shown by A and B.
** Recommended to use four (4) in high wind and vibration environments.
www.LarsonElectronics.com
HAL-RSLED-240W
sales@larsonelectronics.com