Meyer Sound LEOPARD Series Operating Instructions Manual page 42

Compact linear line array loudspeaker
Table of Contents

Advertisement

LEOPARD OPERATING INSTRUCTIONS
Table 7: LEOPARD Ultra Weather Protection Version Accessory and Part Differences
LEOPARD Accessory/Part
MG-LEOPARD/900-LFC
Grid to Loudspeaker Quick-release
pins (with lanyard) Red
5/16 in x 0.875 in with 6-inch
lanyard
(PN 134.025), qty 10
LEOPARD Loudspeaker to
Loudspeaker quick-release pins
Black
5/16 in x 0.63 in
(PN 134.024), qty 8
GROUNDSTACK KIT: MG-
LEOPARD/900-LFC
(PN 40.243.163.01)
(Kit does not include quick-release
pins because the angle feet are
secured with the quick-release pins
included with the grid.)
42
UW LEOPARD Accessory/Part
MG-LEOPARD/900-LFC
Grid to Loudspeaker Fasteners
UW lock pin clamp,
5/16-inch with gasket, qty 4
(PN 45.010.506.05), white OR
(PN 45.010.506.06), black
Hex head screw with washer
8-32 x 3/4-inch, qty 12
(PN 45.010.934.05), white OR
(PN 45.010.934.06), black
CAUTION:
These screws have a
pre-applied thread-locking patch
!
and cannot be reused.
UW lock pin 5/16-in x 0.63-inch
(PN 61.010.504.01), qty 4
LEOPARD Loudspeaker to Loudspeaker
Fasteners
UW lock pin clamp,
5/16-inch with gasket, qty 8
(PN 45.010.506.05), white OR
(PN 45.010.506.06), black
Hex head screw with washer
8-32 x 3/4-inch, qty 20
(PN 45.010.934.05), white OR
(PN 45.010.934.06), black
UW lock pin 5/16-in x 0.63-inch
(PN 61.010.504.01), qty 8
GROUNDSTACK KIT: MG-LEOPARD/900-LFC
UW, white
(PN 40.243.163.05) or
MG-LEOPARD/900-LFC UW, black
(PN 40.243.163.06)
Comment
The clamps, screws, and lock pin replace the quick-release
pins (with lanyard). Torque screws to 12 in-lb (1.36 N·m).
The clamps, screws, and lock pin replace the quick-release
pins (with lanyard). See Figure 26. Torque screws to 12 in-lb
(1.36 N·m).
These UW kits include:
MG-LEOPARD/900-LFC Grid Tilt Assembly
(PN 45.243.163.05 or 45.243.163.06), qty 2
LEOPARD UW/900-LFC UW Grid Links, (PN 61.243.191.05
OR 61.243.191.06), qty 4.
Shoulder bolts 5/16x1-inch with 1/4-20 thread
(PN 101.529), qty 10
Hex Nut, 1/4-20 thread, self-locking (PN 109.107),
qty 10.
The shoulder bolts and hex nuts replace the grid quick-
release pins.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Leopard-m80

Table of Contents