Advertisement
Available languages
Available languages
Installation and Operating Instructions
CHAPTER 3
ELS-SHIPMENT AND
INSTALLATION
CHAPTER 4
INSTALLATION
NOTE
Fan-casing-types ELS-GAP / ELS-GAPB
3.0
ELS-GAP Flame retardant polymer casing without fire protection
– suitable for the installation in buildings without fire protection requirement
ELS-GAPB Flame retardant polymer casing with fire protection encasement
– suitable for the installation in buildings with fire protection requirement K90 and qualified fire protection funnel.
Installation outside of the qualified funel in combination wieht steel/flex. steel duct diameter DN 80 mm.
3.1
Scope of delivery / Packing unit, fig. 1-2
ELS-GAP Fan casing surface mounted
Ÿ
ž
– Surface mounted casing ELS-GAP with quick plug connector for electrical connection
— Surface mounted casing ELS-GAPB with quick plug connector for electrical connection
˜ Discharge spigot convertible
š Cap convertible with bayonet fixing
› Cable grommet
Reversion kid ELS-ARS, discharge to the back, store in casing until final
assembly, spiral insert only required to the final assembly
ž Valve casing with airtight backdraught shutter
Ÿ Balancing weight
4.0
Installation location / position
ELS
Toilet
If the ELS casings are fixed into resonance-strong plasterboards (e.g. flake board, gypsum cardboard or fibre
silicate plates), then the structure-borne sound is to be prevented by flexible intermediate inserts.
fig.1
ELS-GAPB Casing surface mounted
¬
–
›
fig.3
5
˜
›
fig.2
—
Advertisement
Chapters
