Advertisement
Quick Links
AVENIR
SINK MODULE
Model No. GM178-101
Create the ultimate outdoor kitchen by adding a
Gasmate Avenir Sink Module to your Avenir BBQ (sold
separately)
304 grade stainless steel top, fascia and cabinet doors
with powder coated cabinet trolley and shelves
Gasmate® is a registered trademark of: Sitro Group Australia Pty Ltd www.gasmate.com.au
Important: Retain these instructions for future use.
Hot and cold tap mixer
Assembled dimensions (mm): 655W x 910/1068H x 575D
Aber Living - Hamilton, N.Z. www.gasmate.co.nz
5201-07/20
Advertisement
Related Manuals for Gasmate AVENIR GM178-101
Summary of Contents for Gasmate AVENIR GM178-101
- Page 1 304 grade stainless steel top, fascia and cabinet doors with powder coated cabinet trolley and shelves Important: Retain these instructions for future use. Gasmate® is a registered trademark of: Sitro Group Australia Pty Ltd www.gasmate.com.au Aber Living - Hamilton, N.Z. www.gasmate.co.nz 5201-07/20...
-
Page 2: Exploded Diagram
EXPLODED DIAGRAM No. Description No. Description No. Description Sink module top Left door assembly Screw M6x15 Bottom shelf Right door assembly Screw M6x12 Castor without brake Door handle Screw M5x12 Spring washer Ø6 Castor with brake Top panel front fascia Left side panel Sink faucet Wingnut M6... -
Page 3: General Information
GENERAL INFORMATION General Assembly Check Module for any Damage Remove the module from the packing carton. Check Inspect Module parts as you proceed. Contact your against parts list and lay components out within easy supplier for assistance regarding replacement of any reach. - Page 4 ASSEMBLY INSTRUCTIONS STEP 2 Using 4x M6x12mm screws (B) attach the left side panel (5) and the right side panel (6) to the bottom shelf (2). STEP 3 Using 5x M6x12mm screws (B) attach the back panel (7) to the bottom shelf (2) and the left and right panels (5,6).
- Page 5 ASSEMBLY INSTRUCTIONS STEP 4 Using 4x M6x12mm screws (B) attach the top panel (8) to the left and right panels (5,6). STEP 5 Using 4x M6x12mm screws (B) attach the door handles (11) to the left door (9) and to the right door (10).
- Page 6 ASSEMBLY INSTRUCTIONS STEP 6 Attach doors (9,10) to assembled sink module cabinet. STEP 7 Using 4x M5x12mm screws (C) attach the top panel front fascia (12) to the left and right panels (5,6).
- Page 7 ASSEMBLY INSTRUCTIONS STEP 8 Attach the sink faucet (13) to the sink top module (1) using the fastening pack provided. Attach sink (14) to the sink top assembly (1). Attach the drain assembly (15) to the sink (14). STEP 9 Using 4x M6x12mm screws (B) attach assembled sink module top (1) to assembled sink module cabinet.
- Page 8 KITCHEN/MODULE INSTALLATION Modules can only be installed to the right hand side of the BBQ. The side burner MUST NOT be removed. Modules must be a minimum of 200mm away from walls for ventilation. All units must be undercover. STEP 1 Unscrew the BBQ side shelf from the BBQ (if attached).
- Page 9 This page has been left intentionaly blank...
- Page 10 This page has been left intentionaly blank...
- Page 11 This page has been left intentionaly blank...
-
Page 12: Limited Warranty
2 YEAR LIMITED WARRANTY Aber Living warrants the purchaser of this product against defects in workmanship and material, for a period of up to 24 months from the date of purchase. The warranty is non-transferable and becomes void if used for commercial or rental purposes.
Need help?
Do you have a question about the AVENIR GM178-101 and is the answer not in the manual?
Questions and answers