Advertisement
Using Air Conditioner
NOTE: If the air conditioner is turned off,
wait 3 minutes before restarting. This
allows pressure inside the compressor to
equalize.
Failure
to
instructions
may
cause
operation.
Air Conditioner Features
the IMPORTANT SAFETY INSTRUCTIONS before operating this appliance.
To begin operating the air conditioner, follow these steps:
1. Plug in the air conditioner. (To prevent electrical hazards, do not use an extension
cord or an adapter plug.)
2. Set the thermostat to the highest number (coldest or cooler setting).
follow
these
3. Set the selector control to the highest COOL setting.
inefficient
4. Adjust the louvers for comfortable air flow (see Air Directional Louvers).
5. Once the room has cooled, adjust the thermostat to the setting you find most
comfortable.
Review the "Air Conditioner Features" section for other settings.
The controls featured in this manual are representational of the many models
available. Your model may offer slightly different features.
Cool Mode
The desired cool setting is selected by rotating the selector knob to the appropriate
location.
"Max. Cool"
The
"Min. Cool"
The
Fan Mode
"Hi. Fan"
The
cooling is desired.
"Low. Fan"
The
cooling is desired.
Selected the "Fan Mode" automatically stops the compressor from running.
Thermostat (some models)
The thermostat is used to set the desired room temperature when the unit is
being operated in the
To set the desired room temperature, rotate the thermostat switch to the
desired setting. After the set temperature is achieved the thermostat will auto-
matically start and stop the compressor in order to maintain the desired set
temperature.
Rotate the thermostat selector clockwise for higher cool settings. Higher cool
settings will provide lower room temperature.
Rotate the thermostat selector
low cool
To reduce the risk of fire, electric shock, or injury to persons, read
setting should be
setting should be
setting should be selected when maximum air circulation without
setting should be selected when minimum air circulation without
"Cooling Mode"
counter
settings will provide higher room temperature.
5
selected when maximum cooling is desired.
selected when minimum cooling is desired.
.
clockwise for lower cool settings.
Advertisement
