AF Micro Adj.
You can finely adjust the focus of each lens.
Perform this operation only when needed. Note that you may not be able to
properly focus on a subject if you have made a poor adjustment.
MENU button t
t Select the desired value
• The larger the value, the farther the focusing position from the camera;
the smaller the value, the nearer the focusing position to the camera.
Notes
• We recommend that you decide the value under actual shooting conditions.
• When you attach a lens that is registered on the camera, the registered value is
displayed. When you attach an unregistered lens, "±0" is displayed. If "–" is
displayed as the value, then a total of 30 lenses have been registered. When you want
to register a new lens, attach a lens for which you can delete its registered value, and
set that value to "±0," or reset the values of all the lenses with [Clear].
• If you perform AF fine adjustment with a lens of other manufacturers, the
adjustment values of Sony, Minolta, and Konica Minolta lenses may be affected. Do
not use this function with any lens of other manufacturers.
• You cannot individually perform AF fine adjustment when using the Sony, Minolta,
and Konica Minolta lenses that have the same specifications.
Object Tracking
Keeps the focusing on a moving subject while tracking it. The Object
Tracking function is set to [On] in the default setting.
1
Press the center of the multi-selector on the recording
information display.
A target frame appears.
• To turn off the Object Tracking function, press the Fn button, then set it to
[Off].
2 t [AF Micro Adj.] t [On] t [amount]
Adjusting the focus
121