Table of Contents
Advertisement
Complete the SPS Welcome Wizard
2.
Complete the SPS Welcome Wizard (for details, see "Configuring One Identity
Safeguard for Privileged Sessions (SPS) with the Welcome Wizard" in the
Administration Guide). Note the following points specific for Azure deployments.
When configuring the network settings of SPS note the following points.
CAUTION:
Do not export or import configuration between a physical SPS
deployment and a virtual one. Because of the differences and
limitations between physical and virtual appliances, configure the
virtual appliance from scratch to ensure proper functionality. When
you migrate a virtual SPS to another one, you can export and import
the configuration.
a.
Into the Physical interface EXT or 1 — IP
address of the SPS VM that you set on the Azure portal.
b.
Default
GW: The default gateway is usually the first address in a subnet (for
example, if your subnet is 10.7.0.0/24, then the gateway will be 10.7.0.1).
c. Hostname: Use the hostname you have configured for the SPS VM on the
Azure portal.
d.
DNS
server: You can use any DNS server that the SPS VM can access, even
public ones.
Configure SPS
3.
Login to SPS and configure it.
a. Configure backups for SPS. For backup and archiving purposes One Identity
recommends the built-in file shares of Azure. For details on configuring
backups, see "Data and configuration backups" in the Administration Guide.
b. Configure archiving for SPS. For backup and archiving purposes One Identity
recommends the built-in file shares of Azure. For details on configuring
backups, see "Archiving and cleanup" in the Administration Guide. Configuring
Archiving policy is highly recommended: because if the disk of the VM fills up,
SPS stops working.
c. Configure a server: set up a host that is on the same subnet as SPS, and enable
Remote Desktop (RDP) or Secure Shell (SSH) access to it.
d. Configure a connection on SPS to forward the incoming RDP or Secure Shell
(SSH) connection to the host and establish a connection to the host. See
"Logging in to One Identity Safeguard for Privileged Sessions (SPS) and
configuring the first connection" in the Administration Guide for details.
e.
Replay your session in the browser. See "Replaying audit trails in your browser
in Search (classic)" in the Administration Guide for details.
Deploying One Identity Safeguard for Privileged Sessions from the Azure
address field, enter the static IP
SPS 6.0 Installation Guide
Marketplace
34
Advertisement
Table of Contents
