Table of Contents
Advertisement
Installation instruction for radial blowers for areas subject to gas and dust explosion hazards
Comply with safety instructions!
Please read all safety instructions contained in this Installation instruction with care.
Familiarize yourself with the operation of the blower before placing it into service. It will be
too late to do so when doing the work!
Never permit someone without the proper technical knowledge to install and operate this
blower.
Applicability
This Installation instruction applies to all blowers with the following model designations:
(ENG ...or DNG ...) II (2 or 3) G c (IIB or IIC) (T3 or T4);
(EMV ... or DMV ...) II (2 or 3) G c (IIB or IIC) (T3 or T4);
(EMVL ... or DMVL ...) II (2 or 3) G c (IIB or IIC) (T3 or T4);
(ESV2 ... or DSV2 ...) II (2 or 3) G c (IIB or IIC) (T3 or T4);
(ESV4 ... or DSV 4 ...) II (2 or 3) G c (IIB or IIC) (T3 or T4);
DHV ... II (2 or 3) G c (IIB or IIC) (T3 or T4);
(EEG ... or DEG ...) II (2 or 3) G c ( IIB or IIC) (T3 or T4);
(ENG ...or DNG ...) II (2 or 3) D c T125°C;
(EMV ... or DMV ...) II 3 D c T125°C;
(EMVL ... or DMVL ...) II (2 or 3) D c T25°C;
(ESV2 ... or DSV2 ...) II (2 or 3) D c T125°C
(ESV4 ... or DSV 4 ...) II (2 or 3) D c T125°C;
DHV ... II (2 or 3) D c T125°C;
(EEG ... or DEG ...) II (2 der 3) D c T125°C;
(ENG ...or DNG ...) II (2 or 3) GD c (IIB or IIC) (T3 or T4) / T125°C;
(EMV ... or DMV ...) II 3 GD c (IIB or IIC) (T3 or T4) / T125°C;
(EMVL ... or DMVL ...) II (2 or 3) GD c (IIB or IIC) (T3 or T4) / T125°C;
(ESV2 ... or DSV2 ...) II (2 or 3) GD c (IIB or IIC) (T3 or T4) / T125°C;
(ESV4 ... or DSV 4 ...) II (2 or 3) GD c (IIB or IIC) (T3 or T4) / T125°C;
DHV ... II (2 or 3) GD c (IIB or IIC) (T3 or T4) / T125°C;
(EEG ... or DEG ...) II (2 or 3) GD c ( IIB or IIC) (T3 or T4) / T125°C;
Purpose of the Installation instruction
This Installation instruction accompanies the equipment. It also contains the Installation
instruction.
The Installation instruction was prepared by the manufacturer on the basis of their
knowledge and experience with design, production and operating procedures.
The operating entity may supplement this manual with special instructions (for instance for
supervisory and reporting duties, operating specific maintenance and care schedules), in
particular to establish special cleaning intervals to remove dust deposits on the motors.
02/2016 KARL KLEIN Ventilatorenbau GmbH
Page 3
Advertisement
Table of Contents
