Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for TecnoVideo EXPTZ Series
Summary of Contents for TecnoVideo EXPTZ Series
- Page 1 EXPTZ Series Hazardous Area PTZ Camera Station Installation manual Issue 20200115...
-
Page 2: Table Of Contents
TABLE OF CONTENTS Page DESCRIPTION PRELIMINARY REMARKS INSTALLING THE UNIT General information Perform the electrical connections Auxiliary functions (available on CR versions only) Password and reset button (available on CR versions only) Default limits Changing the default limits Preset Special auxiliary functions (available on CR versions only) INSTALLING THE NOZZLE BRACKET SETTING THE UNIT ADDRESS CLOSING THE UNIT... -
Page 3: Description
DESCRIPTION The EXPTZ is a variable speed stainless steel PTZ camera station specifically designed for Hazardous Area applications. The design of the unit ensures the best protection from external agents along with easy installation and maintenance service. EXPTZ PTZ camera stations are equipped with the latest generation zoom module day/night and thermal imaging cameras, but they are also available for Customer's specified cameras. -
Page 4: Installing The Unit
INSTALLING THE UNIT Make sure that the installation surface can support at least four times the weight of the unit in normal operating conditions. In case of excessive external stress (e.g. vibration, strong winds or impact), the equipment may need additional means of protection. Proper stainless steel hardware should be carefully chosen to fasten the unit to the surfaces. - Page 5 Open the base junction box and perform the connections on the MF_RTX interface board. Connections through the plug-in blocks are made by Tecnovideo, while screw terminal blocks are used for the field installation. It must be noted that each plug-in connector is different in shape and/or colour to avoid any wrong connection.
- Page 6 Fuse value 6,3 A T 250 VAC 5x20 10 A T 250 VAC 5x20 All the fuse must be T type (time lag). Different supply voltage can be supplied and may require different fuse values. In such cases, please contact Tecnovideo.
-
Page 7: Auxiliary Functions (Available On Cr Versions Only)
Auxiliary functions (available on CR versions only) The unit has 8 auxiliary functions, as described below: Aux1 is used for Wiper activation only (this function will activate the wiper for approx. 10 seconds). Aux2 is used for Washer pump activation only (this function will activate the washer pump for approx. 5 seconds). Aux3 is used for Wash-Wiper STOPPABLE automatic cycle (this function will activate the wash-wiper cycle approx. -
Page 8: Installing The Nozzle Bracket
INSTALLING THE NOZZLE BRACKET* M6 nut 2x M6 washers M6 nut M6 washer bracket * Only on CR versions with washer system SETTING THE UNIT ADDRESS The 8 way dip-switch on the telemetry receiver (DIS1) can be used to set up the unit address (binary). When a switch is on the ON position, the relative digit has value 1, otherwise the value is 0. -
Page 9: Maintenance
Any intervention which is not listed in the routine activities list must be done in absence of potentially explosive atmosphere. Any repair or replacement must be done by, or under supervision of, Tecnovideo. Use only original spare parts. The manufacturer declines all liability for any damage resulting from tampering, use of non-original spare parts and service carried out without following the directives of the present manual. -
Page 10: Dimensions
DESCRIPTION: brief description of the unit (such as camera housing, P&T unit, …); MODEL: model name of the unit (such as EX129, EXPTZ, …); S/N: Tecnovideo serial number followed by the year of manufacturing; VOLTAGE: supply voltage of the unit; MAX POWER: maximum dissipated power of the unit. - Page 12 The manufacturer declines all responsibility for any consequences resulting from improper use of the product, or use which is different from that expected and specified in the present documents. TECNOVIDEO S.r.l. Via A. De Gasperi, 3 36030 Villaverla (VI) ITALY Tel.
Need help?
Do you have a question about the EXPTZ Series and is the answer not in the manual?
Questions and answers