Advertisement
or see other devices on
Network setup menu
Lan Settings:-
Lan IP:- Sets the IP and Subnet of the Access point.
STP:-
Spanning Tree Protocol (STP) is a network protocol designed to prevent layer 2 loops
and it's standardized as IEEE 802.D protocol.
Manage setup menu
Configure:- Allows you to save the configuration file to your computer.
Restore:- Restore the back of the configuration file (also useful for installing many access
points with the same configuration).
Reset Default:- Resets the access point back to the manufacturers default settings.
Telnet:- Allows access to the devices Telnet port (port 22)
As a security risk we suggest this is turned off unless specifically needed
9
Plug & Play Or Get Technical
your network.
Advertisement
