Advertisement
Using Windows PC
1. Confirm the PoE port on the PSU is
2. By default, the AP is in Gateway mode you can connect to the device by joining its
Wi-Fi network and using the default IP 192.168.188.253
3. If you have set the device in AP mode you will need to connect the devices LAN Port
with PC, set static IP on PC to 192.168.188.250 and set the Gateway to the default
IP address of 192.168.188.253. (as below) Open browser, input AP IP address
192.168.188.253 to log into the WEB GUI using the default password of admin.
3
Plug & Play Or Get Technical
48V
Advertisement
