1. Manuals
  2. Brands
  3. elsner elektronik Manuals
  4. Smoke Alarm
  5. Salva KNX basic
  6. Technical specifications and installation instructions

elsner elektronik Salva KNX Technical Specifications And Installation Instructions

Hide thumbs Also See for Salva KNX:
Table of Contents

Advertisement

Quick Links

Download this manual
Salva
Smoke alarm
as replacement element for Salva KNX (70405, 70406) or for installation without KNX
Technical specifications and installation instructions
Item number 70409
EN
Elsner Elektronik GmbH Control and Automation Engineering
Sohlengrund 16
75395 Ostelsheim
Germany
Phone+49 (0) 70 33 / 30 945-0 info@elsner-elektronik.de
Fax +49 (0) 70 33 / 30 945-20 www.elsner-elektronik.de
echnical Service: +49 (0) 70 33 / 30 945-250
T

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Salva KNX and is the answer not in the manual?

Questions and answers

Related Manuals for elsner elektronik Salva KNX

Summary of Contents for elsner elektronik Salva KNX

  • Page 1 Salva Smoke alarm as replacement element for Salva KNX (70405, 70406) or for installation without KNX Technical specifications and installation instructions Item number 70409 Elsner Elektronik GmbH Control and Automation Engineering Sohlengrund 16 75395 Ostelsheim Phone+49 (0) 70 33 / 30 945-0 info@elsner-elektronik.de Germany Fax +49 (0) 70 33 / 30 945-20 www.elsner-elektronik.de...

  • Page 2: Technical Specifications

    Description Salva can be used as an independent smoke alarm or as replacement element for the KNX smoke alarms Salva KNX TH and Salva KNX basic. The smoke alarm features an automatic evaluation sensor system for early and accu- rate fire alarms. Alarms are output as a local acoustic signal.

  • Page 3: Installation Notes

    Installation as separate unit Dimensions Ø approx. 113 mm, height approx. 58 mm Weight approx. 280 g Ambient temperature Operation -10…+60°C, storage -10°C … +60°C Surrounding air humidity max. 93% RH, avoid condensation Operating voltage 9 V (battery) Smoke alarm: Detection principle Tyndall effect (optical) Alarm display...

  • Page 4: Installation Location

    Elsner Elektronik is not liable for any changes in norms and standards which may occur after publication of these operating instructions.
  • Page 5 Installation as separate unit Halls and corridors: ≤ 15 m ≤ 7,5 m Attach the first alarm at a maximum distance of 7.50 m to the end of the room in long struc- tures. Distribute at least 3 alarms on 15 m of corridor.

  • Page 6: Device Design

    Installation as separate unit Do not paint the smoke alarms! 2.3. Device design 2.3.1. Exterior view Fig. 2 Skirting Housing with electronics and battery Openings for air circulation Light transmission bar: Red LED for Operating and alarm signals, page 12 and Push-button for Function test, page 10 Smoke alarm Salva •...
  • Page 7 Installation as separate unit 2.3.2. Skirting Fig. 3 Battery assembly lock (the housing cannot be closed without a battery) Fastening opening with 1 screw Openings for fastenings with 2 screws (distance 67 mm) Opening for bus cable 2.3.3. Interior view of the housing Fig.

  • Page 8: Installing The Device

    Installation as separate unit 2.4. Installing the device 2.4.1. Instructions for assembly and initial start-up Never expose the device to water (e.g. rain) or dust (e.g. drilling dust). This can damage the electronics and the sensor system. A relative air humidity of 93% may not be ex- ceeded.

  • Page 9: Inserting The Battery

    Installation as separate unit 2.4.3. Inserting the battery The supply line of the smoke alarm occurs via a 9 V battery. WARNING! Danger of explosion in case of improper handling of the battery! Property damage by battery leakage. • Do not recharge batteries. •...

  • Page 10: Maintenance

    Maintenance Maintenance In some German federal states, the owner of houses and flats are responsible for the installation and functioning of smoke alarms according to LBO (State construction laws) (see www.rauchmelder-lebensretter.de). Maintenance has to be conducted at least annually and, according to DIN 14676 includes a visual inspection, a function test and, if required, a battery change.

  • Page 11: Replace The Battery

    Maintenance 3.2. Replace the battery The device is supplied with 9 V voltage from a battery. Lack of battery capacity is sig- nalled optically and acoustically for 30 days. Fig. 10 Separate the smoke alarm from the skirting by turning it anti-clockwise. Fig.

  • Page 12: Alarm Memory

    Device alarm functions The used battery and the device must be disposed of properly so that valuable resources may be recycled. Neither the battery nor the device may be disposed of together with domestic or company waste. 3.2.2. Serial number The serial number on the type plate inside the device contains the production data and device number: Ser.no.
  • Page 13 Use as replacement element for KNX smoke Function / meaning Signal tone Red LED Battery exchange display 1x Short signal tone Flashes every 40 seconds every 40 seconds together with the signal tone Alarm mute (acknowledge- No sound Flashes every 10 seconds ment) Alarm memory active No sound...
  • Page 14 Use as replacement element for KNX smoke Fig. 17 5. Insert the board into the replacement ele- ment. The plug-in connection must be closed again. Screw the board onto the spacers. 6. Connect the device to the bus again. 7. Insert the battery. Fig.

This manual is also suitable for:

704057040670409

Table of Contents