Summary of Contents for DROPSA nano Progressive Replaceable
Page 1
Divider “nano Progressive Replaceable” User operation and Maintenance manual Original instruction INDEX INTRODUZIONE DESCRIZIONE GENERALE CARATTERISTICHE TECNICHE PACCHI DOSATORI E LORO IDENTIFICAZIONE DISPOSITIVI DI CONTROLLO DEL CICLO INDICATORI DI RILEVAMENTO PRESSIONE TUBI, RACCORDI E VALVOLE COMPOSIZIONE DEL PACCO DOSATORI INFORMAZIONE D’ORDINE...
Page 2
300bar (4350psi). You can obtain the latest release of this document by contacting a Dropsa sales office or distributor or by visiting us on the World Wide Web at http://www.dropsa.com.
Page 3
Metering elements are available with 4 different flow rates. Each nPr- Nano Progressive can be assembled with a minimum of 3 elements and maximum of 12. Q. cm³ Part No. DESCRIPTION 0,025 0645650 nPR 025-DOSATORE "nano Progressive Replaceable" 0,045 0645651 nPR 045-DOSATORE "nano Progressive Replaceable" 0,075 0645652 nPR 075-DOSATORE "nano Progressive Replaceable"...
Page 4
B) Visual monitoring pin with colour strip. This must be ordered with the divider element. DIVIDER with colour strip visual indicator Q. cm³ PAR NUMBER DESCRIPTION 0,025 0645678 VISUAL INDICATOR nPR 025 "nano Progressive Replaceable" 0,045 0645679 VISUAL INDICATOR nPR 045 "nano Progressive Replaceable" 0,075 0645680 VISUAL INDICATOR nPR 075 "nano Progressive Replaceable"...
Page 5
6. OVER-PRESSURE INDICATOR Pressure indicators are used to control pressure in main or secondary tubing. They can be applied directly on the alternate outlet/indicator port that is standard on all nPr divider elements. There are three types of indicators that give a different visual indication linked to the pressure set on the device.
Page 6
8. DIVIDER BLOCKS ASSEMBLY To order a Pre-assembled Assembly the following ‘string’ formation is used to identify the sequencing of the elements and the order of assembly. −...) INLET Config. and PACK ELEMENT configuration (repeat for N° element) PRESSURE COTROL OUTLET N°...
Page 7
9. ORDERING INFORMATIONS INLET ELEMENT PART NUMBER DESCRIPTION PART NUMBER DESCRIPTION 0645647 0645648 INLET nPr -S 20mm reduced hole centers INLET nPr METERING ELEMENT Q.cm³ PART NUMBER DESCRIPTION Q.cm³ PART NUMBER DESCRIPTION 0,025 0645650 nPR 025- DIVIDER 0,075 0645652 nPR 075- DIVIDER 0,045 0645651 nPR 045- DIVIDER...
Page 8
10. DIMENSIONS 0645747 - 0645748 - nPR-INIZIALE S - INLET 20mm reduced hole centers mm [inch] mm [inch] N° N° “A” “B” “C” “D” “A” “B” “C” “D” elements elements 76.3 82.8 [3.26] 90.3 96.8 [3.55] [3.82] 104.3 110.8 [4.11] [4.36] 118.3 124.8...
• Skin contact with oil -> see requirements for the use of appropriate PPE; • Unsuitable Lubricant. Lubricant characteristics are indicated on the pump and in this user manual. In any case contact a Dropsa Sales and Support engineer (if in any doubts, contact the Technical Department Dropsa SpA); by the •...
Need help?
Do you have a question about the nano Progressive Replaceable and is the answer not in the manual?
Questions and answers