Belleco JT3-TW Operations And Maintenance Procedures

Belleco JT3-TW Operations And Maintenance Procedures

Conveyor toaster

Advertisement

OPERATIONS AND MAINTENANCE PROCEDURES
U.S. AND CANADA CALL: 1-877-854-8006
CLEANING (DAILY & WEEKLY)
SPARE PARTS LISTINGS
Foodservice Equipment Specialists
P.O. Box 880 Saco, ME. / U.S.A. 04072
877-854-8006 * FAX (207) 854-8009
CONVEYOR TOASTER MODELS
FOR SERVICE ASSISTANCE
24 HOURS/DAY 7 DAYS/WEEK

TABLE OF CONTENTS

PAGE 1
PAGE 1
PAGE 1
PAGE 2
PAGE 2
PAGE 3
PAGE 3
PAGE 4
PAGE 5
PAGE 6
PAGE 6
5-20-05 RJB

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the JT3-TW and is the answer not in the manual?

Questions and answers

Summary of Contents for Belleco JT3-TW

  • Page 1 Foodservice Equipment Specialists P.O. Box 880 Saco, ME. / U.S.A. 04072 877-854-8006 * FAX (207) 854-8009 OPERATIONS AND MAINTENANCE PROCEDURES CONVEYOR TOASTER MODELS JT3TW FOR SERVICE ASSISTANCE U.S. AND CANADA CALL: 1-877-854-8006 24 HOURS/DAY 7 DAYS/WEEK TABLE OF CONTENTS UNCRATNG AND INSPECTION PAGE 1 ASSEMBLY AND INSTALLATION PAGE 1...
  • Page 2 Removal or replacement of the power cord and plug will VOID the warranty. For assistance, contact the Belleco, Inc. Service Group at 1-877-854-8006. Please refer to the appropriate schematic at the rear of this manual for plug configurations.
  • Page 3 Buns, Bagels and English Muffins may be tested the same as above but with either Variable Heat Control reduced. It is recommended by Belleco, Inc. that such one sided toasting be done cut- side up to prevent lines on the toasted surface.
  • Page 4 PAGE 3 OPERATIONS AND MAINTENANCE PROCEDURES CONVEYOR TOASTER MODELS JT3TW CLEANING PROCEDURE Preventive Maintenance programs on your toaster will provide many years of production at full capacity. Lack of Preventive Maintenance can shorten the life cycle of the toaster and/or result in reduced capacities.
  • Page 5 PAGE 4 OPERATIONS AND MAINTENANCE PROCEDURES CONVEYOR TOASTER MODELS JT3TW GENERAL MAINTENANCE 1. REPLACING HEATER TUBES (Tip – replace only one tube at a time to prevent confusion when re-wiring) a. DISCONNECT TOASTER FROM POWER SOURCE. b. Remove both side panels. c.
  • Page 6 Slowly rotate the conveyor belt by hand to see where the binding is taking place. Once it is discovered, clear the jam and re-assemble the toaster. d. Test under power. If the conveyor belt will not operate, call the Belleco, Inc. service group at 1-877-854-8006 as either the Drive Motor and/or Speed Control...
  • Page 7 "If the power cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or its service agent" HEATER TUBE GUIDE Model # Voltage Part# Wattage Qty. JT3-TW 208V 204000 700W JT3-TW 220V 204003 700W...

This manual is also suitable for:

204000204003204100

Table of Contents