Page 1
Foodservice Equipment Specialists P.O. Box 880 Saco, ME. / U.S.A. 04072 877-854-8006 * FAX (207) 854-8009 OPERATIONS AND MAINTENANCE PROCEDURES CONVEYOR TOASTER MODEL - JT1 & JT1-B FOR SERVICE ASSISTANCE U.S. AND CANADA CALL: 1-877-854-8006 24 HOURS/DAY 7 DAYS/WEEK TABLE OF CONTENTS...
Page 2
Removal or replacement of the power cord and plug will VOID the warranty. For assistance, contact the Belleco, Inc. Service Group at 1-877-854-8006. CAUTION – During installation: Do not place on surfaces or near walls, partitions or kitchen furniture and the like –...
Page 3
Buns, Bagels and English Muffins may be tested the same as above but with either Variable Heat Control reduced. It is recommended by Belleco, Inc. that such one sided toasting be done cut- side up to prevent lines on the toasted surface.
Page 4
PAGE 3 OPERATIONS AND MAINTENANCE PROCEDURES CONVEYOR TOASTER MODEL – JT1 & JT1-B WARNING – NEVER SPRAY YOUR TOASTER WITH WATER. NEVER SUBMERGE INTO WATER. Daily – 1) Clean the air intake area under the toaster with a slightly dampened cloth.
Slowly rotate the conveyor belt by hand to see where the binding is taking place. Once it is discovered, clear the jam and re-assemble the toaster. d. Test under power. If the conveyor belt will not operate, call the Belleco, Inc. service group at 1-877-854-8006 as either the Drive Motor and/or Speed Control...
Page 6
OPERATIONS AND MAINTENANCE PROCEDURES CONVEYOR TOASTER MODEL – JT1 & JT1-B "If the power cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer (Belleco, Inc.) or its service agent" JT1 SPARE PARTS LISTS DESCRIPTION...
Need help?
Do you have a question about the JT1 and is the answer not in the manual?
Questions and answers