Subscribe to Our Youtube Channel
Related Manuals for Lenoxx BCR663
Summary of Contents for Lenoxx BCR663
- Page 1 MODEL: BCR663 BATCH NO: PR3659 PLEASE READ & RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.
- Page 2 SAFETY INFORMATION AND WARNINGS: * Do not press two or more keys at the same time. * To avoid failure, the interval of every touch must be more than 1 second. * If there is any malfunction, please unplug the unit for 3 seconds. * If the batteries are not used for a long time, please remove.
- Page 3 FUNCTIONS: • LED time display in 12-hour or 24-hour format • White light and colour light • Sunrise simulation wake-up light • Sunset simulation sleep light • 10 levels of light brightness • Automatic mood light colour changing • Choose a coloured mood light from 6 different colours •...
- Page 4 OVERVIEW: light display Time display Snooze Current time Alarm Sunset Down Light Nature 12H-24H format sounds Intensity Volume of time display USB 5V Battery compartment Antenna Stand...
- Page 5 OPERATION: 1. Place the Wake-up Light 40-50 cm from your head, for example on a bedside table. 2. Connect with DC 5V power, after 1 second the unit will enter the clock setting mode. SETTING THE CLOCK TIME: 1. You must set the clock time when you plug in the appliance for the first time and when there has been a power failure.
- Page 6 8. When powered by 2 x AAA batteries, time display will automatically disappear in 5 seconds, you can press any of the buttons to show the time display. LIGHT: 1. First touch the button to switch on white light and use it as a bedside lamp. You can adjust the white light intensity by touching the buttons , there are 10 different levels of brightness.
- Page 7 Press the button again to confirm the wake-up sound. The setting will be cancelled if there is no action in 5 seconds. 6. You can choose a volume level (for the wake-up sound) between 00 and 15 (default is 10) by pressing the button on the rear of the unit repeatedly to increase the volume level to your chosen level.
- Page 8 1. 30 minutes before sunset time, the sunset simulation white light will be on at 100% intensity whatever at any mode, and then it will become lower and lower intensity until turn off at sunset time. 2. During sunset light period, you can switch off sunset light by long touching the button for 3 seconds.
Need help?
Do you have a question about the BCR663 and is the answer not in the manual?
Questions and answers