Table of Contents
Advertisement
ABOUT THE DIMENSION 1200ES
PRINTERS
The Dimension 1200es printers incorporate the latest in innovative technologies to provide you with precise
prototypes from a CAD design. Three-dimensional parts are built by extruding a bead of ABS plastic through a
computer-controlled extrusion head, producing high quality parts that are ready to use immediately after
completion. With two layer resolution settings, you can choose to build a part quickly for design verification, or
you can choose a finer setting for higher quality surface detail.
COMPONENTS
•
The Dimension 1200es Printer
•
Catalyst EX Software Package
HIGHLIGHTS
•
Maximum build area of 10x 10x 12 inch (254 x 254 x 305 mm)
•
User Interface with Display Panel and Keypad
HOW TO USE THIS GUIDE
This guide provides information for selecting an appropriate location for the Dimension 1200es printer.
Information of particular importance is presented in one of three formats:
Warning: A WARNING indicates a procedure that may cause injury to an operator
if the procedure is not followed. A WARNING will precede the paragraph of
instruction to which it relates.
Caution: A CAUTION indicates a procedure that may cause damage to equipment
if the procedure is not followed. A CAUTION will precede the paragraph of
instruction to which it relates.
Note: A NOTE is used to highlight a specific point or to provide an operational tip.
While useful, a NOTE does not indicate a procedure that can cause injury or
damage if it is not followed. A NOTE will follow the paragraph of instruction to which
it relates.
1
Advertisement
Table of Contents
