Table of Contents
Advertisement
8
4
7
5
6
1
2
3
9
1
power on/off button
2
visual indication type button
3
sound indication type button
parameter selection buttons (left/
◄/►
4
right)
5
filter button (broadband on/off)
6
memory button
start/pause button
7
(measurement mode)
sensitivity buttons (higher/lower)
8
/
Technical specifications of the Receiver are listed in Appendix A.
Screen controls are listed in Appendix B.
1. Insert 4 AA elements in battery compartment of the receiver, observing the polarity. Pic
2.1 p.14 If accumulators are used, they should be fully charged with charger, supplied
separately.
Receiver cab also work from external PowerBank, supplied separately*.
NOTE
AP-027 automatically switches to external power supply, when connected to PowerBank.
Some models of PowerBanks should be activated by pressing separate button on their body.
When working at negative temperatures (to -20°С) place PowerBank under clothes.
2. Receiver AP-027
Appearance and Controls
10
11
2.1 Preparing Receiver AP-027 for operation
12
13
Fig. 2.1
selected parameter adjustment
▲/▼
9
buttons (up/down)
frequency button (filter frequency
10
adjustment on/off)
LCD screen
11
headphones jack
12
13
sensors connector
protective insert
14
15
external power supply socket
*Set of external PowerBank (for
example, Xiaomi Mi Power Bank
20000 mAh with protective case and
power adaptor питания
ART-U90EWE 5.0 V/2.0 A)
3
14
15
SAMSUNG
Advertisement
Table of Contents
