ViziT KTM600R Operating Instructions Manual

RF C ontroller VIZIT-KTM600R
premises and is able to control either electromagnetic or electromechanical lock. ,
and control unit KTM600 M,
Only VIZIT-RF2 keys (125 KHz ) are supported
·
Entrance door unlocking
·
Entrance door unlocking by pressing the indoor EXIT button
·
Guard mode can be enabled
or the MASTER key - (1 key).
·
Programmable unlocked state duration
·
Light and sound indication of operating modes
·
MASTER key memorizing -
·
GUARD and ACCESS keys memorizing and erasing
·
All data erasing
Control unit KTM600M
for control unit KTM600M
Screw 3.5 25 -
RF- keys, lock and EXIT
The product does not contain voltage above
Do not make any connections or repair when the power is on
Take care not to spill any liquids or chemically active substances on the product. Switch the power off before cleaning the
product. Clean by wiping with dry soft cloth. Do not use any liquid cleaners, aerosol cleaners or abrasive agents
www.vizit.eu
VIZIT-КТМ600R
OPERATING INSTRUCTION
is intended for access control in auxiliary, industrial and inhabited buildings and
and may be used as the part of doorphone as well as stand-alone system.
.
with ACCESS keys (up to 2680 keys)
or disabled with a GUARD
All ACCESS keys are disabled in this mode
1 s or 7 s
x 1
x 2 x 2
х Anchor - 6х30
300M button are available upon request.
SAFETY INSTRUCTIONS
2 4 VDC
OPERATING INSTRUCTION
a
FEATURES
key (up to 28 keys)
PARTS LIST
x 1
Reader RD-3
Fasteners
for reader RD-3
x 2
Screw 3.5 3 - х 0
.
.
RF c ontroller con tains the
x 1
Operating Instruction
x 2
x 4
Anchor - 6х30 Gag
VIZIT-КТМ600R
reader RD-3
.
1/6