ViziT KTM602R Operating Instructions Manual

RF C ontroller VIZIT-KTM60 R
premises and is able to control either electromagnetic or electromechanical lock. ,
and control unit KTM60 2M,
Only VIZIT-RF2 keys (125 KHz ) are supported
·
Entrance door unlocking
·
Entrance door unlocking by pressing the indoor EXIT button
·
Guard mode can be enabled
or the MASTER key - (1 key).
·
Built-in power supply for lock and doorstation
·
Programmable unlocked state duration
·
Light and sound indication of operating modes
·
MASTER key memorizing -
·
GUARD and ACCESS keys memorizing and erasing
·
All data erasing
Control unit KTM602M
for control unit KTM602M
Screw 3.5 25 -
RF- keys, lock and EXIT
WARNING! The c ontrol nit contains dangerous for life high voltage -
Unplu g the unit before replacing
repair when the power is on.
The mains plug shall remain readily operable.
No metallic objects shall penetrate into ventilation openings of the unit. The unit shall not be exposed to dripping or
splashing and no objects filled with liquids shall be placed on the unit.
www.vizit.eu
VIZIT-КТМ602R
OPERATING INSTRUCTION
2 is intended for access control in auxiliary, industrial and inhabited buildings and
and may be used as the part of doorphone as well as stand-alone system.
.
with ACCESS keys (up to 2680 keys)
or disabled with a GUARD
All ACCESS keys are disabled in this mode
1 s or 7 s
x 1
x 4 x 4
х Anchor - 6х30
300M button are available upon request.
SAFETY INSTRUCTIONS
u
the fuse and connecting wires.To avoid damage or electric shock do not make any
OPERATING INSTRUCTION
a
FEATURES
key (up to 28 keys)
PARTS LIST
x 1
Reader RD-3
Fasteners
for reader RD-3
x 2
Screw 3.5 3 - х 0
230 V .
RF c ontroller con tains the
x 1
Operating Instruction
x 2
x 4
Anchor - 6х30
Gag
VIZIT-КТМ602R
reader RD-3
1/6