Toro MM E-S Series Operator's Manual page 5

– Hard hat
– Respirator or dust mask
– Face shield or safety glasses
– Hearing protection
– Safety shoes
– Long pants
– Shirt with long sleeves buttoned at the wrists
– Tight-fitting gloves without drawstrings or loose cuffs
•
Secure long hair, loose clothing, or jewelry that may get
tangled in moving parts.
•
Operating the equipment safely requires the full attention
of the operator. Do not wear radio or music headphones
while operating the machine.
•
Ensure that the machine is on a level surface before
operating the machine.
•
Chock the tires of the machine to prevent unintended
movement.
•
Before every use, do the following:
– Inspect the coupler, ball, and hitch.
– Ensure that all lights are functioning properly (if
equipped with a light kit).
– Ensure that the tires are properly inflated as
recommended.
– Ensure that the lug nuts are tight and torqued
properly.
– Ensure that the machine is properly secured.
Operation
•
Never run the machine in a poorly ventilated or enclosed
area without proper respiratory protection. Dust from
materials being mixed can be very harmful to operators
and bystanders.
•
Only operate the machine in good lighting conditions.
•
Before starting the machine, make sure that there are no
persons or obstacles near or under the machine.
•
Never leave a running machine unattended. Always stop
the motor and verify that all moving parts have stopped.
•
Chock the tires of the machine or keep it attached to the
towing vehicle when it is not in use, to prevent it from
rolling.
•
Keep hands away from any moving parts. Keep feet away
from the tires and the front post.
•
Do not operate the machine outdoors in the rain.
•
Do not operate the machine under the influence of
alcohol or drugs.
•
Ensure that the area is clear of other people or pets before
operating the machine. Stop the machine if anyone enters
the area.
•
Never place your hands or any solid object into the drum
when the machine is in operation.
•
Do not touch parts which may be hot from operation.
Allow them to cool before attempting to maintain, adjust,
or service the machine.
•
Never move the machine while the motor is running.
•
Keep the cowl closed and latched during operation.
•
Ensure that all the guards and shields are securely in place
before operating the machine.
•
Ensure that the On/Off switch is in the Off position
before connecting the machine to the electrical source.
•
If the mixing paddles strike a foreign object or if the
machine should start making an unusual noise or
vibration, stop the motor and empty the drum. Wait for
all moving parts to come to a complete stop and cool.
Vibration is generally a warning of trouble. Inspect for
clogging or damage. Clean and repair and/or replace
damaged parts.
•
Lightning can cause severe injury or death. If you see
lightning or hear thunder in the area, do not operate the
machine; seek shelter.
5