Toro MM E-S Series Operator's Manual page 21

3. Loosen the nuts and bolts that secure the paddle blades
to the paddles (Figure 29).
Note: If necessary, tip the drum to the dump position
to access the paddles.
1
2
Figure 29
4. Move the paddle blades to the preferred position, and
tighten the nuts and bolts to secure the blades to the
paddles.
Note: Ensure that the clutch lever is in the Off
position, and rotate the paddles as needed.
5. Install the grate with the nuts and bolts that you
removed in step 2, and tighten the nuts and bolts until
they are secure.
G022160
21