Download Print this page

Advertisement

Quick Links

X-1 MINI
This X-Stand™ product(s) has been tested to rigid industry standards. Safe operation and use
of this X-Stand™ product(s) is the responsibility of the user(s). Please read and follow all safe
use instructions and warnings. Failure to follow these may result in serious injury or death!
First Edition, January 2017, Published by X-Stand™ TREESTANDS, Apple Valley Minnesota.
© 2017 X-Stand™ TREESTANDS. All rights reserved.

Advertisement

loading
Need help?

Need help?

Do you have a question about the X-1 MINI and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for X-Stand X-1 MINI

  • Page 1 This X-Stand™ product(s) has been tested to rigid industry standards. Safe operation and use of this X-Stand™ product(s) is the responsibility of the user(s). Please read and follow all safe use instructions and warnings. Failure to follow these may result in serious injury or death! First Edition, January 2017, Published by X-Stand™...
  • Page 2 WARNING! A Treestand Safety: It’s Up To You DVD has been included with this treestand. Please view it in its entirety prior to using this or any other X-Stand™ WARNING! Several X-Stand™ Treestands are equipped with a footrest, armrests and/ product(s).
  • Page 3 Failure to follow these instructions may you intend to climb. Do not attempt to use this or any other X-Stand™ product(s) when result in serious injury or death! use this or any other X-Stand™...
  • Page 4 WARNING! You must use the X-Stand™ Treestand full-body fall arrest harness provided with this product or a harness that complies with ASTM standards. NOTE: You must store your full-body fall arrest harness out of direct sunlight and out of any other harsh environmental condition(s) that may adversely affect its performance. Failure to follow these instructions may result in serious injury or death! STEP 1.
  • Page 5 Fig 5. Wrap the tree belt around the tree trunk. You must install your tree belt at or above your legs. The X-Stand™ Treestands full-body fall arrest harness should look like the eye-level (Fig 7). DO NOT allow the lanyard loop to cover the tree belt buckle. Keep the one depicted in Figure 5 when done correctly.
  • Page 6 Should you have an questions about the assembly, installation or use of this X-Stand product, or any other X-Stand products, please do not hesitate to call one of our customer service representatives at 540-877-2769 and they will answer all questions you may have about any of the complete line of X-Stand products.
  • Page 7 X-1 MINI - PARTS LIST Part # Description Part # Description XP15-0353 FOOT PLATFORM XP15-0371 BUNGEE CORD XP15-0355 SEAT PLATFORM XP15-0375 SEAT CUSHION XP15-0357 FLEX ARMS XP15-0378 ARMREST FOAM XP15-0360 SECURITY/BACKPACKING XP15-0379 ARMREST COVERS STRAPS (MALE) XP15-0011 FULL-BODY HARNESS XP15-0361...
  • Page 8 ASSEMBLY INSTRUCTIONS - X-1 MINI - FIGURE 1a FIGURE 1 Cable Seat Platform Flex Arms NOTE: Top (seat) section of your platform should be assembled with cable adjusters pointing down and the bark biter on the lower portion of the frame.
  • Page 9 STEP 3. Next install the climbing cable by inserting one end of one (1) the climbing cables into the cable adjuster by pulling on the spring bolt. (Fig 1A). Then thread the cable through the eye holes of the flex arms and insert the free end of the cable into the cable adjuster on the opposite side by pulling on the pin.
  • Page 10 WARNING! This X-Stand is equipped with two (2) security/connector straps (they double as backpacking straps also). These security/connector straps are designed to stabilize your X-Stand while at climbing height and to keep the foot platform from separating from the seat platform inadvertently while climbing. THEY MUST REMAIN CONNECTED AT ALL TIMES.
  • Page 11 To tighten the foot climbing height, the security straps must be tightened to cinch and secure the X-Stand to straps simply push your feet outward when climbing or descending. This will keep the the tree trunk. Once you have reached your strap tight.
  • Page 12 CLIMBING DOWN - X-1 MINI- WARNING! After descending back to the ground, do not remove FIGURE 6 the full-body fall arrest harness tether from the tree until you have to follow this warning may result in serious injury or death! STEP 1.
  • Page 13 With the bungee cord installed, slip the female (short ends) end of the security straps through the platform treads and connect the male (long ends) end to the female ends. (Fig 11). You can now carry your X-Stand using the backpacking straps/ security straps (Fig 12). FIGURE 11...
  • Page 14 WARNING! Security straps have been included with your X-Stand climber. These are designed to connect the standing platform to the seating platform. In the unlikely event you lose contact with either while climbing, these security straps allow you to regain control. Prior to climbing, insure these security straps are installed. Failure to follow these instructions...
  • Page 15: Standard Limited Warranty

    Limitations: This warranty is void if the product is damaged by improper or abnormal use or by accident; if the product is altered or modified in any way other that those directed by official X-Stand™ Treestands instructions; or if any attempt is made to repair the product without authorization from X- Stand™...
  • Page 16 First Edition,January 2017 Published by X-Stand Treestands, Apple Valley Minnesota. © X-Stand Treestands. All rights reserved.