KEUCO Edition 400 Series Mounting Instruction page 3

These instructions are for both the installer for
installation and the user for operation and main-
tenance of the product. After installation, please
hand them over to the user to keep.
Symbols and explanations
Attention! Warning against bodily injury or
damage to property.
Note, tip or reference
Correct installation/test of functionality
Incorrect installation
Observe installation details
Cold water
Water fl ow
Optional/accessories
Intended use
Single lever mixer tap for use in bathrooms
and WCs. Operation possible with pressure
tanks and thermally and hydraulically controlled
instantaneous water heaters. Operation with
unpressurised tanks (open water heaters) is not
possible!
Operation only with potable water.
Product is only suitable for installation indoors!
Attention! Only install in frost-free places.
WARNING -
This product can expose you to chemicals
including Nickel and/or Lead, which is/are known
to the State of California to cause cancer/birth
defects or other reproductive harm.
For more information go to:
www.P65Warnings.ca.gov
Important information, please read!
Hot water
No water fl ow
California Prop 65
.
Technical specifi cations
Flow at 60 psi pressure
- Bath tub:
- Shower:
Installation dimensions, refer to page 2
Installation, refer to picture 1 on page 6
Flush potable water pipes thoroughly before and
after installation.
Use only neutrally netting silicone.
Test connections for leaks with water pressure.
Operation, refer to picture 14 and 15 on page 8
Temperature controll, refer to picture 16 and 17 on
page 8
Assemble in reverse order.
Servicing, refer to picture 18 on page 8
For spare parts with order numbers, refer to page 11.
To obtain warranty repair or replacement Ser-
vice, please contact KEUCO Managment Inc.
Service at: offi ce-usa@keuco.com.
For warranty and care information please refer
to the attached warranty and care instruc-
tions.
US
approx. 8.2 gpm
approx. 7.7 gpm
3