Trouble Shooting And Handling - Pyle PPBCM8 User Manual

•
Video Delay: O , On
•
Motion Detection: O , On
•
Photo Size: 36M, 21M, 16M, 12M, 10M, 8M, 5M, 2M
•
Continuous Shoot: O , 2 sheets, 3 sheets, 5 sheets, 10 sheets
3. System parameters setting list as below:
•
Volume: O , Low, Medium, High
•
Screen Saver: O , 1 Minute, 3 Minutes, 5 Minutes
•
Auto Power O : O , 3 Minutes, 5 Minutes, 10 Minutes
•
Auto night vision: Manual, Auto
•
Frequency: 50Hz, 60Hz
•
Date/Time: YYYY/MM/DD, HH/MM/SS. Press UP/Down button to select correct
date and time, press OK button to con rm each gure, after date and time
xed, press Menu button to get back to System parameters setting list.
•
Language: English, Traditional Chinese, Simplify Chinese, Japanese, Korean,
Russian
•
ID setting: 6 gures ID number. Press UP/Down button to select correct each
gure and con rm by pressing OK button, after ID number is xed, press
Menu button to get back to System parameters setting list.
•
Format: Cancel, OK
•
Default Setting: Cancel, OK
•
Version: version number
Other features:
•
Torch light: short press "Up/Torch" button to turn on/o torch light.
Torch light is for using in dark situation to add more light.
•
Laser pointer: short press "Power" button to turn on/o laser pointer.
Laser pointer can show the direction where lens is recording.

TROUBLE SHOOTING AND HANDLING

1. Camera cannot boot.
•
Please charge camera battery for more than 2hours rst then try to turn on
camera again.
2. Camera cannot respond.
•
Please press reset button for 2seconds then restart camera.
3. Device failed to connect to computer.
•
Please change to another USB port on computer to connect the camera or
change another USB cable.
Note: If above solutions cannot solve the problems, please contact customer
service sta to return for factory repair.
www.PyleUSA.com
5